initial commit

:wqMerge branch 'new_flax_design' of https://github.com/patrickvonplaten/transformers into new_flax_design
fix copies
2020-12-15 19:20:33 +01:00 · 2020-12-15 16:24:26 +00:00 · 2020-12-15 16:24:21 +00:00 · 2020-12-15 17:11:14 +01:00 · 2020-12-15 16:07:34 +00:00 · 2020-12-15 16:03:53 +00:00
1069 changed files with 10647 additions and 47470 deletions
@@ -3,28 +3,6 @@ orbs:
    gcp-gke: circleci/gcp-gke@1.0.4
    go: circleci/go@1.3.0

-commands:
-  skip-job-on-doc-only-changes:
-    description: "Do not continue this job and exit with success for PRs with only doc changes"
-    steps:
-
-      - run:
-          name: docs-only changes skip check
-          command: |
-            # pipeline.git.base_revision is not always defined, so only proceed if all external vars are defined
-            if test -n "<< pipeline.git.base_revision >>" && test -n "<< pipeline.git.revision >>" && test -n "$(git diff --name-only << pipeline.git.base_revision >>...<< pipeline.git.revision >>)"
-            then
-                if git diff --name-only << pipeline.git.base_revision >>...<< pipeline.git.revision >> | egrep -qv '\.(md|rst)$'
-                then
-                    echo "Non-docs were modified in this PR, proceeding normally"
-                else
-                    echo "Only docs were modified in this PR, quitting this job"
-                    # disable skipping for now, as circleCI's base_revision is inconsistent leading to invalid ranges
-                    # circleci step halt
-                fi
-            else
-                echo "Can't perform skipping check w/o base_revision defined, continuing the job"
-            fi

 # TPU REFERENCES
 references:
@@ -95,7 +73,6 @@ jobs:
        parallelism: 1
        steps:
            - checkout
-            - skip-job-on-doc-only-changes
            - restore_cache:
                  keys:
                      - v0.4-torch_and_tf-{{ checksum "setup.py" }}
@@ -122,7 +99,6 @@ jobs:
        parallelism: 1
        steps:
            - checkout
-            - skip-job-on-doc-only-changes
            - restore_cache:
                  keys:
                      - v0.4-torch-{{ checksum "setup.py" }}
@@ -149,7 +125,6 @@ jobs:
        parallelism: 1
        steps:
            - checkout
-            - skip-job-on-doc-only-changes
            - restore_cache:
                  keys:
                      - v0.4-tf-{{ checksum "setup.py" }}
@@ -176,7 +151,6 @@ jobs:
        parallelism: 1
        steps:
            - checkout
-            - skip-job-on-doc-only-changes
            - restore_cache:
                keys:
                    - v0.4-flax-{{ checksum "setup.py" }}
@@ -203,7 +177,6 @@ jobs:
        parallelism: 1
        steps:
            - checkout
-            - skip-job-on-doc-only-changes
            - restore_cache:
                  keys:
                      - v0.4-torch-{{ checksum "setup.py" }}
@@ -230,7 +203,6 @@ jobs:
        parallelism: 1
        steps:
            - checkout
-            - skip-job-on-doc-only-changes
            - restore_cache:
                  keys:
                      - v0.4-tf-{{ checksum "setup.py" }}
@@ -255,7 +227,6 @@ jobs:
            RUN_CUSTOM_TOKENIZERS: yes
        steps:
            - checkout
-            - skip-job-on-doc-only-changes
            - restore_cache:
                  keys:
                      - v0.4-custom_tokenizers-{{ checksum "setup.py" }}
@@ -283,14 +254,13 @@ jobs:
        parallelism: 1
        steps:
            - checkout
-            - skip-job-on-doc-only-changes
            - restore_cache:
                  keys:
                      - v0.4-torch_examples-{{ checksum "setup.py" }}
                      - v0.4-{{ checksum "setup.py" }}
            - run: pip install --upgrade pip
            - run: pip install .[sklearn,torch,sentencepiece,testing]
-            - run: pip install -r examples/requirements.txt
+            - run: pip install -r examples/_tests_requirements.txt
            - save_cache:
                  key: v0.4-torch_examples-{{ checksum "setup.py" }}
                  paths:
@@ -1,10 +1,10 @@
 // These two things need to be updated at each release for the version selector.
 // Last stable version
 const stableVersion = "v4.0.0"
-// Dictionary doc folder to label
+// Dictionary doc folder to label. The last stable version should have an empty key.
 const versionMapping = {
    "master": "master",
-    "v4.0.0": "v4.0.0",
+    "": "v4.0.0 (stable)",
    "v3.5.1": "v3.5.0/v3.5.1",
    "v3.4.0": "v3.4.0",
    "v3.3.1": "v3.3.0/v3.3.1",
@@ -34,5 +34,5 @@ help people access the inner representations, mainly adapted from the great work
  in https://arxiv.org/abs/1905.10650.

 To help you understand and use these features, we have added a specific example script: `bertology.py
-<https://github.com/huggingface/transformers/blob/master/examples/bertology/run_bertology.py>`_ while extract
-information and prune a model pre-trained on GLUE.
+<https://github.com/huggingface/transformers/blob/master/examples/research_projects/bertology/run_bertology.py>`_ while
+extract information and prune a model pre-trained on GLUE.
@@ -15,7 +15,8 @@ Utilities for Generation

 This page lists all the utility functions used by :meth:`~transformers.PretrainedModel.generate`,
 :meth:`~transformers.PretrainedModel.greedy_search`, :meth:`~transformers.PretrainedModel.sample`,
-:meth:`~transformers.PretrainedModel.beam_search`, and :meth:`~transformers.PretrainedModel.beam_sample`.
+:meth:`~transformers.PretrainedModel.beam_search`, :meth:`~transformers.PretrainedModel.beam_sample`, and
+:meth:`~transformers.PretrainedModel.group_beam_search`.

 Most of those are only useful if you are studying the code of the generate methods in the library.

@@ -31,6 +32,9 @@ generation.
 .. autoclass:: transformers.LogitsProcessorList
    :members: __call__

+.. autoclass:: transformers.LogitsWarper
+    :members: __call__
+
 .. autoclass:: transformers.MinLengthLogitsProcessor
    :members: __call__

@@ -52,6 +56,12 @@ generation.
 .. autoclass:: transformers.NoBadWordsLogitsProcessor
    :members: __call__

+.. autoclass:: transformers.PrefixConstrainedLogitsProcessor
+    :members: __call__
+
+.. autoclass:: transformers.HammingDiversityLogitsProcessor
+    :members: __call__
+
 BeamSearch
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

@@ -60,3 +70,10 @@ BeamSearch

 .. autoclass:: transformers.BeamSearchScorer
    :members: process, finalize
+
+Utilities
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+.. autofunction:: transformers.top_k_top_p_filtering
+
+.. autofunction:: transformers.tf_top_k_top_p_filtering
@@ -91,8 +91,6 @@ TensorFlow loss functions
 TensorFlow Helper Functions
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

-.. autofunction:: transformers.modeling_tf_utils.cast_bool_to_primitive
-
 .. autofunction:: transformers.modeling_tf_utils.get_initializer

 .. autofunction:: transformers.modeling_tf_utils.keras_serializable
@@ -22,6 +22,8 @@ Utilities

 .. autoclass:: transformers.EvalPrediction

+.. autoclass:: transformers.EvaluationStrategy
+
 .. autofunction:: transformers.set_seed

 .. autofunction:: transformers.torch_distributed_zero_first
@@ -32,8 +34,15 @@ Callbacks internals

 .. autoclass:: transformers.trainer_callback.CallbackHandler

+
 Distributed Evaluation
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

 .. autoclass:: transformers.trainer_pt_utils.DistributedTensorGatherer
    :members:
+
+
+Distributed Evaluation
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+.. autoclass:: transformers.HfArgumentParser
@@ -13,9 +13,10 @@
 Models
 -----------------------------------------------------------------------------------------------------------------------

-The base classes :class:`~transformers.PreTrainedModel` and :class:`~transformers.TFPreTrainedModel` implement the
-common methods for loading/saving a model either from a local file or directory, or from a pretrained model
-configuration provided by the library (downloaded from HuggingFace's AWS S3 repository).
+The base classes :class:`~transformers.PreTrainedModel`, :class:`~transformers.TFPreTrainedModel`, and
+:class:`~transformers.FlaxPreTrainedModel` implement the common methods for loading/saving a model either from a local
+file or directory, or from a pretrained model configuration provided by the library (downloaded from HuggingFace's AWS
+S3 repository).

 :class:`~transformers.PreTrainedModel` and :class:`~transformers.TFPreTrainedModel` also implement a few methods which
 are common among all the models to:
@@ -57,6 +58,13 @@ TFModelUtilsMixin
    :members:


+FlaxPreTrainedModel
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+.. autoclass:: transformers.FlaxPreTrainedModel
+    :members:
+
+
 Generation
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

@@ -74,6 +74,10 @@ Learning Rate Schedules (Pytorch)
    :target: /imgs/warmup_linear_schedule.png
    :alt:

+
+.. autofunction:: transformers.get_polynomial_decay_schedule_with_warmup
+
+
 Warmup (TensorFlow)
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

@@ -73,8 +73,9 @@ FillMaskPipeline
 NerPipeline
 =======================================================================================================================

-This class is an alias of the :class:`~transformers.TokenClassificationPipeline` defined below. Please refer to that
-pipeline for documentation and usage examples.
+.. autoclass:: transformers.NerPipeline
+
+See :class:`~transformers.TokenClassificationPipeline` for all details.

 QuestionAnsweringPipeline
 =======================================================================================================================
@@ -118,6 +119,13 @@ TokenClassificationPipeline
    :special-members: __call__
    :members:

+TranslationPipeline
+=======================================================================================================================
+
+.. autoclass:: transformers.TranslationPipeline
+    :special-members: __call__
+    :members:
+
 ZeroShotClassificationPipeline
 =======================================================================================================================

@@ -60,6 +60,13 @@ AlbertTokenizer
        create_token_type_ids_from_sequences, save_vocabulary


+AlbertTokenizerFast
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+.. autoclass:: transformers.AlbertTokenizerFast
+    :members:
+
+
 Albert specific outputs
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

@@ -175,3 +175,10 @@ TFAutoModelForQuestionAnswering

 .. autoclass:: transformers.TFAutoModelForQuestionAnswering
    :members:
+
+
+FlaxAutoModel
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+.. autoclass:: transformers.FlaxAutoModel
+    :members:
@@ -98,6 +98,12 @@ BartTokenizer
    :members:


+BartTokenizerFast
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+.. autoclass:: transformers.BartTokenizerFast
+    :members:
+

 BartModel
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -105,8 +111,6 @@ BartModel
 .. autoclass:: transformers.BartModel
    :members: forward

-.. autofunction:: transformers.models.bart.modeling_bart._prepare_bart_decoder_inputs
-

 BartForConditionalGeneration
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -51,3 +51,9 @@ BarthezTokenizer
 .. autoclass:: transformers.BarthezTokenizer
    :members:

+
+BarthezTokenizerFast
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+.. autoclass:: transformers.BarthezTokenizerFast
+    :members:
@@ -207,3 +207,10 @@ FlaxBertModel

 .. autoclass:: transformers.FlaxBertModel
    :members: __call__
+
+
+FlaxBertForMaskedLM
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+.. autoclass:: transformers.FlaxBertForMaskedLM
+    :members: __call__
@@ -54,6 +54,13 @@ CamembertTokenizer
        create_token_type_ids_from_sequences, save_vocabulary


+CamembertTokenizerFast
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+.. autoclass:: transformers.CamembertTokenizerFast
+    :members:
+
+
 CamembertModel
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

@@ -57,6 +57,13 @@ LayoutLMTokenizer
    :members:


+LayoutLMTokenizerFast
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+.. autoclass:: transformers.LayoutLMTokenizerFast
+    :members:
+
+
 LayoutLMModel
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

@@ -90,6 +90,13 @@ MBartTokenizer
    :members: build_inputs_with_special_tokens, prepare_seq2seq_batch


+MBartTokenizerFast
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+.. autoclass:: transformers.MBartTokenizerFast
+    :members:
+
+
 MBartForConditionalGeneration
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

@@ -1,3 +1,15 @@
+.. 
+    Copyright 2020 The HuggingFace Team. All rights reserved.
+
+    Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with
+    the License. You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on
+    an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the
+    specific language governing permissions and limitations under the License.
+
 MPNet
 -----------------------------------------------------------------------------------------------------------------------

@@ -37,6 +37,22 @@ MT5Config
    :members:


+MT5Tokenizer
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+.. autoclass:: transformers.MT5Tokenizer
+
+See :class:`~transformers.T5Tokenizer` for all details.
+
+
+MT5TokenizerFast
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+.. autoclass:: transformers.MT5TokenizerFast
+
+See :class:`~transformers.T5TokenizerFast` for all details.
+
+
 MT5Model
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

@@ -112,6 +112,13 @@ warning: ``add_tokens`` does not work at the moment.
    :members: __call__, prepare_seq2seq_batch


+PegasusTokenizerFast
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+.. autoclass:: transformers.PegasusTokenizerFast
+    :members:
+
+
 PegasusForConditionalGeneration
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

@@ -163,6 +163,13 @@ ReformerTokenizer
    :members: save_vocabulary


+ReformerTokenizerFast
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+.. autoclass:: transformers.ReformerTokenizerFast
+    :members:
+
+
 ReformerModel
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

@@ -107,6 +107,13 @@ T5Tokenizer
        create_token_type_ids_from_sequences, prepare_seq2seq_batch, save_vocabulary


+T5TokenizerFast
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+.. autoclass:: transformers.T5TokenizerFast
+    :members:
+
+
 T5Model
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

@@ -124,7 +131,7 @@ T5EncoderModel
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

 .. autoclass:: transformers.T5EncoderModel
-    :members: forward
+    :members: forward, parallelize, deparallelize

 TFT5Model
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -105,3 +105,11 @@ TFTransfoXLLMHeadModel

 .. autoclass:: transformers.TFTransfoXLLMHeadModel
    :members: call
+
+
+Internal Layers
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+.. autoclass:: transformers.AdaptiveEmbedding
+
+.. autoclass:: transformers.TFAdaptiveEmbedding
@@ -62,6 +62,13 @@ XLMRobertaTokenizer
        create_token_type_ids_from_sequences, save_vocabulary


+XLMRobertaTokenizerFast
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+.. autoclass:: transformers.XLMRobertaTokenizerFast
+    :members:
+
+
 XLMRobertaModel
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

@@ -62,6 +62,13 @@ XLNetTokenizer
        create_token_type_ids_from_sequences, save_vocabulary


+XLNetTokenizerFast
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+.. autoclass:: transformers.XLNetTokenizerFast
+    :members:
+
+
 XLNet specific outputs
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

@@ -60,7 +60,7 @@ Basic steps
 In order to upload a model, you'll need to first create a git repo. This repo will live on the model hub, allowing
 users to clone it and you (and your organization members) to push to it.

-You can create a model repo directly from the website, `here <https://huggingface.co/new>`.
+You can create a model repo **directly from `the /new page on the website <https://huggingface.co/new>`__.**

 Alternatively, you can use the ``transformers-cli``. The next steps describe that process:

@@ -82,12 +82,12 @@ This creates a repo on the model hub, which can be cloned.

 .. code-block:: bash

-    git clone https://huggingface.co/username/your-model-name
-
    # Make sure you have git-lfs installed
    # (https://git-lfs.github.com/)
    git lfs install

+    git clone https://huggingface.co/username/your-model-name
+
 When you have your local clone of your repo and lfs installed, you can then add/remove from that clone as you would
 with any other git repo.

@@ -98,8 +98,12 @@ with any other git repo.
    echo "hello" >> README.md
    git add . && git commit -m "Update from $USER"

-We are intentionally not wrapping git too much, so as to stay intuitive and easy-to-use.
+We are intentionally not wrapping git too much, so that you can go on with the workflow you're used to and the tools
+you already know.

+The only learning curve you might have compared to regular git is the one for git-lfs. The documentation at
+`git-lfs.github.com <https://git-lfs.github.com/>`__ is decent, but we'll work on a tutorial with some tips and tricks
+in the coming weeks!

 Make your model work on all frameworks
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
@@ -110,7 +114,7 @@ Make your model work on all frameworks
 You probably have your favorite framework, but so will other users! That's why it's best to upload your model with both
 PyTorch `and` TensorFlow checkpoints to make it easier to use (if you skip this step, users will still be able to load
 your model in another framework, but it will be slower, as it will have to be converted on the fly). Don't worry, it's
-super easy to do (and in a future version, it will all be automatic). You will need to install both PyTorch and
+super easy to do (and in a future version, it might all be automatic). You will need to install both PyTorch and
 TensorFlow for this step, but you don't need to worry about the GPU, so it should be very easy. Check the `TensorFlow
 installation page <https://www.tensorflow.org/install/pip#tensorflow-2.0-rc-is-available>`__ and/or the `PyTorch
 installation page <https://pytorch.org/get-started/locally/#start-locally>`__ to see how.
@@ -192,7 +196,7 @@ status`` command:
    git add --all
    git status

-Finally, the files should be comitted:
+Finally, the files should be committed:

 .. code-block:: bash

@@ -210,23 +214,20 @@ This will upload the folder containing the weights, tokenizer and configuration
 Add a model card
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

-To make sure everyone knows what your model can do, what its limitations and potential bias or ethetical
-considerations, please add a README.md model card to the 🤗 Transformers repo under `model_cards/`. It should then be
-placed in a subfolder with your username or organization, then another subfolder named like your model
-(`awesome-name-you-picked`). Or just click on the "Create a model card on GitHub" button on the model page, it will get
-you directly to the right location. If you need one, `here <https://github.com/huggingface/model_card>`__ is a model
-card template (meta-suggestions are welcome).
+To make sure everyone knows what your model can do, what its limitations, potential bias or ethical considerations are,
+please add a README.md model card to your model repo. You can just create it, or there's also a convenient button
+titled "Add a README.md" on your model page. A model card template can be found `here
+<https://github.com/huggingface/model_card>`__ (meta-suggestions are welcome). model card template (meta-suggestions
+are welcome).
+
+.. note::
+
+    Model cards used to live in the 🤗 Transformers repo under `model_cards/`, but for consistency and scalability we
+    migrated every model card from the repo to its corresponding huggingface.co model repo.

 If your model is fine-tuned from another model coming from the model hub (all 🤗 Transformers pretrained models do),
 don't forget to link to its model card so that people can fully trace how your model was built.

-If you have never made a pull request to the 🤗 Transformers repo, look at the :doc:`contributing guide <contributing>`
-to see the steps to follow.
-
-.. note::
-
-    You can also send your model card in the folder you uploaded with the CLI by placing it in a `README.md` file
-    inside `path/to/awesome-name-you-picked/`.

 Using your model
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
@@ -262,7 +263,8 @@ First you need to install `git-lfs` in the environment used by the notebook:

    sudo apt-get install git-lfs

-Then you can use the :obj:`transformers-cli` to create your new repo:
+Then you can use either create a repo directly from `huggingface.co <https://huggingface.co/>`__ , or use the
+:obj:`transformers-cli` to create it:


 .. code-block:: bash
@@ -274,13 +276,14 @@ Once it's created, you can clone it and configure it (replace username by your u

 .. code-block:: bash

+    git lfs install
+
    git clone https://username:password@huggingface.co/username/your-model-name
    # Alternatively if you have a token,
    # you can use it instead of your password
    git clone https://username:token@huggingface.co/username/your-model-name

    cd your-model-name
-    git lfs install
    git config --global user.email "email@example.com"
    # Tip: using the same email than for your huggingface.co account will link your commits to your profile
    git config --global user.name "Your name"
@@ -1142,3 +1142,66 @@ To start a debugger at the point of the warning, do this:
 .. code-block:: bash

    pytest tests/test_logging.py -W error::UserWarning --pdb
+
+
+
+Testing Experimental CI Features
+-----------------------------------------------------------------------------------------------------------------------
+
+Testing CI features can be potentially problematic as it can interfere with the normal CI functioning. Therefore if a
+new CI feature is to be added, it should be done as following.
+
+1. Create a new dedicated job that tests what needs to be tested
+2. The new job must always succeed so that it gives us a green ✓ (details below).
+3. Let it run for some days to see that a variety of different PR types get to run on it (user fork branches,
+   non-forked branches, branches originating from github.com UI direct file edit, various forced pushes, etc. - there
+   are so many) while monitoring the experimental job's logs (not the overall job green as it's purposefully always
+   green)
+4. When it's clear that everything is solid, then merge the new changes into existing jobs.
+
+That way experiments on CI functionality itself won't interfere with the normal workflow.
+
+Now how can we make the job always succeed while the new CI feature is being developed?
+
+Some CIs, like TravisCI support ignore-step-failure and will report the overall job as successful, but CircleCI and
+Github Actions as of this writing don't support that.
+
+So the following workaround can be used:
+
+1. ``set +euo pipefail`` at the beginning of the run command to suppress most potential failures in the bash script.
+2. the last command must be a success: ``echo "done"`` or just ``true`` will do
+
+Here is an example:
+
+.. code-block:: yaml
+
+    - run:
+        name: run CI experiment
+        command: |
+            set +euo pipefail
+            echo "setting run-all-despite-any-errors-mode"
+            this_command_will_fail
+            echo "but bash continues to run"
+            # emulate another failure
+            false
+            # but the last command must be a success
+            echo "during experiment do not remove: reporting success to CI, even if there were failures"
+
+For simple commands you could also do:
+
+.. code-block:: bash
+
+    cmd_that_may_fail || true
+
+Of course, once satisfied with the results, integrate the experimental step or job with the rest of the normal jobs,
+while removing ``set +euo pipefail`` or any other things you may have added to ensure that the experimental job doesn't
+interfere with the normal CI functioning.
+
+This whole process would have been much easier if we only could set something like ``allow-failure`` for the
+experimental step, and let it fail without impacting the overall status of PRs. But as mentioned earlier CircleCI and
+Github Actions don't support it at the moment.
+
+You can vote for this feature and see where it is at at these CI-specific threads:
+
+* `Github Actions: <https://github.com/actions/toolkit/issues/399>`__
+* `CircleCI: <https://ideas.circleci.com/ideas/CCI-I-344>`__
@@ -16,59 +16,58 @@ limitations under the License.

 # Examples

-Version 2.9 of 🤗 Transformers introduced a new [`Trainer`](https://github.com/huggingface/transformers/blob/master/src/transformers/trainer.py) class for PyTorch, and its equivalent [`TFTrainer`](https://github.com/huggingface/transformers/blob/master/src/transformers/trainer_tf.py) for TF 2.
-Running the examples requires PyTorch 1.3.1+ or TensorFlow 2.2+.
-
-Here is the list of all our examples:
- **grouped by task** (all official examples work for multiple models)
- with information on whether they are **built on top of `Trainer`/`TFTrainer`** (if not, they still work, they might
-  just lack some features),
- whether or not they leverage the [🤗 Datasets](https://github.com/huggingface/datasets) library.
- links to **Colab notebooks** to walk through the scripts and run them easily,
- links to **Cloud deployments** to be able to deploy large-scale trainings in the Cloud with little to no setup.
-
+This folder contains actively maintained examples of use of 🤗 Transformers organized along NLP tasks. If you are looking for an example that used to
+be in this folder, it may have moved to our [research projects](https://github.com/huggingface/transformers/tree/master/examples/research_projects) subfolder (which contains frozen snapshots of research projects).

 ## Important note

 **Important**

-To make sure you can successfully run the latest versions of the example scripts, you have to **install the library from source** and install some example-specific requirements.
-Execute the following steps in a new virtual environment:
-
+To make sure you can successfully run the latest versions of the example scripts, you have to **install the library from source** and install some example-specific requirements. To do this, execute the following steps in a new virtual environment:
 ```bash
 git clone https://github.com/huggingface/transformers
 cd transformers
 pip install .
-pip install -r ./examples/requirements.txt
+```
+Then cd in the example folder of your choice and run
+```bash
+pip install -r requirements.txt
 ```

-Alternatively, you can run the version of the examples as they were for your current version of Transformers via (for instance with v3.4.0):
+Alternatively, you can run the version of the examples as they were for your current version of Transformers via (for instance with v3.5.1):
 ```bash
-git checkout tags/v3.4.0
+git checkout tags/v3.5.1
 ```

 ## The Big Table of Tasks

+Here is the list of all our examples:
+- with information on whether they are **built on top of `Trainer`/`TFTrainer`** (if not, they still work, they might
+  just lack some features),
+- whether or not they leverage the [🤗 Datasets](https://github.com/huggingface/datasets) library.
+- links to **Colab notebooks** to walk through the scripts and run them easily,
+<!--
+Coming soon!
+- links to **Cloud deployments** to be able to deploy large-scale trainings in the Cloud with little to no setup.
+-->
+
 | Task | Example datasets | Trainer support | TFTrainer support | 🤗 Datasets | Colab
 |---|---|:---:|:---:|:---:|:---:|
 | [**`language-modeling`**](https://github.com/huggingface/transformers/tree/master/examples/language-modeling)       | Raw text        | ✅ | -  | ✅ | [![Open In Colab](https://colab.research.google.com/assets/colab-badge.svg)](https://colab.research.google.com/github/huggingface/blog/blob/master/notebooks/01_how_to_train.ipynb)
-| [**`text-classification`**](https://github.com/huggingface/transformers/tree/master/examples/text-classification)   | GLUE, XNLI      | ✅ | ✅ | ✅ | [![Open In Colab](https://colab.research.google.com/assets/colab-badge.svg)](https://github.com/huggingface/notebooks/blob/master/examples/text_classification.ipynb)
-| [**`token-classification`**](https://github.com/huggingface/transformers/tree/master/examples/token-classification) | CoNLL NER       | ✅ | ✅ | ✅ | -
 | [**`multiple-choice`**](https://github.com/huggingface/transformers/tree/master/examples/multiple-choice)           | SWAG, RACE, ARC | ✅ | ✅ | - | [![Open In Colab](https://colab.research.google.com/assets/colab-badge.svg)](https://colab.research.google.com/github/ViktorAlm/notebooks/blob/master/MPC_GPU_Demo_for_TF_and_PT.ipynb)
 | [**`question-answering`**](https://github.com/huggingface/transformers/tree/master/examples/question-answering)     | SQuAD           | ✅ | ✅ | ✅ | -
-| [**`text-generation`**](https://github.com/huggingface/transformers/tree/master/examples/text-generation)           | -               | n/a | n/a | - | [![Open In Colab](https://colab.research.google.com/assets/colab-badge.svg)](https://colab.research.google.com/github/huggingface/blog/blob/master/notebooks/02_how_to_generate.ipynb)
-| [**`distillation`**](https://github.com/huggingface/transformers/tree/master/examples/distillation)                 | All             | - | -  | - | -
 | [**`summarization`**](https://github.com/huggingface/transformers/tree/master/examples/seq2seq)                     | CNN/Daily Mail  | ✅  | - | - | -
+| [**`text-classification`**](https://github.com/huggingface/transformers/tree/master/examples/text-classification)   | GLUE, XNLI      | ✅ | ✅ | ✅ | [![Open In Colab](https://colab.research.google.com/assets/colab-badge.svg)](https://github.com/huggingface/notebooks/blob/master/examples/text_classification.ipynb)
+| [**`text-generation`**](https://github.com/huggingface/transformers/tree/master/examples/text-generation)           | -               | n/a | n/a | - | [![Open In Colab](https://colab.research.google.com/assets/colab-badge.svg)](https://colab.research.google.com/github/huggingface/blog/blob/master/notebooks/02_how_to_generate.ipynb)
+| [**`token-classification`**](https://github.com/huggingface/transformers/tree/master/examples/token-classification) | CoNLL NER       | ✅ | ✅ | ✅ | -
 | [**`translation`**](https://github.com/huggingface/transformers/tree/master/examples/seq2seq)                       | WMT             | ✅  | - | - | -
-| [**`bertology`**](https://github.com/huggingface/transformers/tree/master/examples/bertology)                       | -               | - | - | - | -
-| [**`adversarial`**](https://github.com/huggingface/transformers/tree/master/examples/adversarial)                   | HANS            | ✅ | - | - | -


-<br>
-
+<!--
 ## One-click Deploy to Cloud (wip)

 **Coming soon!**
+-->

 ## Running on TPUs

@@ -0,0 +1,20 @@
+tensorboard
+scikit-learn
+seqeval
+psutil
+sacrebleu
+rouge-score
+tensorflow_datasets
+matplotlib
+git-python==1.0.3
+faiss-cpu
+streamlit
+elasticsearch
+nltk
+pandas
+datasets >= 1.1.3
+fire
+pytest
+conllu
+sentencepiece != 0.1.92
+protobuf
@@ -1,3 +1,19 @@
+<!---
+Copyright 2020 The HuggingFace Team. All rights reserved.
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+    http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+-->
+
 # 🤗 Benchmark results

 Here, you can find a list of the different benchmark results created by the community.
@@ -1,3 +1,17 @@
+# Copyright 2020 The HuggingFace Team. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
 import csv
 from collections import defaultdict
 from dataclasses import dataclass, field
@@ -1,3 +1,17 @@
+# Copyright 2020 The HuggingFace Team. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
 # tests directory-specific settings - this file is run automatically
 # by pytest before any tests are run

@@ -1,5 +0,0 @@
-# Community contributed examples
-
-This folder contains examples which are not actively maintained (mostly contributed by the community).
-
-Using these examples together with a recent version of the library usually requires to make small (sometimes big) adaptations to get the scripts working.
@@ -1,3 +1,19 @@
+<!---
+Copyright 2020 The HuggingFace Team. All rights reserved.
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+    http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+-->
+
 ## Language model training

 Fine-tuning (or training from scratch) the library models for language modeling on a text dataset for GPT, GPT-2,
@@ -0,0 +1,3 @@
+datasets >= 1.1.3
+sentencepiece != 0.1.92
+protobuf
@@ -0,0 +1,641 @@
+# coding=utf-8
+# Copyright 2020 The HuggingFace Team All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+"""
+Fine-tuning the library models for masked language modeling (BERT, ALBERT, RoBERTa...) with whole word masking on a
+text file or a dataset.
+
+Here is the full list of checkpoints on the hub that can be fine-tuned by this script:
+https://huggingface.co/models?filter=masked-lm
+"""
+import logging
+import os
+import sys
+from dataclasses import dataclass, field
+
+# You can also adapt this script on your own masked language modeling task. Pointers for this are left as comments.
+from pathlib import Path
+from typing import Dict, List, Optional, Tuple
+
+import numpy as np
+from datasets import load_dataset
+from tqdm import tqdm
+
+import jax
+import jax.numpy as jnp
+from flax import jax_utils
+from flax.optim import Adam
+from flax.training import common_utils
+from flax.training.common_utils import get_metrics
+from jax.nn import log_softmax
+from transformers import (
+    CONFIG_MAPPING,
+    MODEL_FOR_MASKED_LM_MAPPING,
+    AutoConfig,
+    AutoTokenizer,
+    FlaxBertForMaskedLM,
+    HfArgumentParser,
+    PreTrainedTokenizerBase,
+    TensorType,
+    TrainingArguments,
+    is_tensorboard_available,
+    set_seed,
+)
+
+
+# Cache the result
+has_tensorboard = is_tensorboard_available()
+if has_tensorboard:
+    try:
+        from flax.metrics.tensorboard import SummaryWriter
+    except ImportError as ie:
+        has_tensorboard = False
+        print(f"Unable to display metrics through TensorBoard because some package are not installed: {ie}")
+
+else:
+    print(
+        "Unable to display metrics through TensorBoard because the package is not installed: "
+        "Please run pip install tensorboard to enable."
+    )
+
+
+MODEL_CONFIG_CLASSES = list(MODEL_FOR_MASKED_LM_MAPPING.keys())
+MODEL_TYPES = tuple(conf.model_type for conf in MODEL_CONFIG_CLASSES)
+
+
+@dataclass
+class ModelArguments:
+    """
+    Arguments pertaining to which model/config/tokenizer we are going to fine-tune, or train from scratch.
+    """
+
+    model_name_or_path: Optional[str] = field(
+        default=None,
+        metadata={
+            "help": "The model checkpoint for weights initialization."
+            "Don't set if you want to train a model from scratch."
+        },
+    )
+    model_type: Optional[str] = field(
+        default=None,
+        metadata={"help": "If training from scratch, pass a model type from the list: " + ", ".join(MODEL_TYPES)},
+    )
+    config_name: Optional[str] = field(
+        default=None, metadata={"help": "Pretrained config name or path if not the same as model_name"}
+    )
+    tokenizer_name: Optional[str] = field(
+        default=None, metadata={"help": "Pretrained tokenizer name or path if not the same as model_name"}
+    )
+    cache_dir: Optional[str] = field(
+        default=None, metadata={"help": "Where do you want to store the pretrained models downloaded from s3"}
+    )
+    use_fast_tokenizer: bool = field(
+        default=True,
+        metadata={"help": "Whether to use one of the fast tokenizer (backed by the tokenizers library) or not."},
+    )
+
+
+@dataclass
+class DataTrainingArguments:
+    """
+    Arguments pertaining to what data we are going to input our model for training and eval.
+    """
+
+    dataset_name: Optional[str] = field(
+        default=None, metadata={"help": "The name of the dataset to use (via the datasets library)."}
+    )
+    dataset_config_name: Optional[str] = field(
+        default=None, metadata={"help": "The configuration name of the dataset to use (via the datasets library)."}
+    )
+    train_file: Optional[str] = field(default=None, metadata={"help": "The input training data file (a text file)."})
+    validation_file: Optional[str] = field(
+        default=None,
+        metadata={"help": "An optional input evaluation data file to evaluate the perplexity on (a text file)."},
+    )
+    train_ref_file: Optional[str] = field(
+        default=None,
+        metadata={"help": "An optional input train ref data file for whole word masking in Chinese."},
+    )
+    validation_ref_file: Optional[str] = field(
+        default=None,
+        metadata={"help": "An optional input validation ref data file for whole word masking in Chinese."},
+    )
+    overwrite_cache: bool = field(
+        default=False, metadata={"help": "Overwrite the cached training and evaluation sets"}
+    )
+    max_seq_length: Optional[int] = field(
+        default=None,
+        metadata={
+            "help": "The maximum total input sequence length after tokenization. Sequences longer "
+            "than this will be truncated. Default to the max input length of the model."
+        },
+    )
+    preprocessing_num_workers: Optional[int] = field(
+        default=None,
+        metadata={"help": "The number of processes to use for the preprocessing."},
+    )
+    mlm_probability: float = field(
+        default=0.15, metadata={"help": "Ratio of tokens to mask for masked language modeling loss"}
+    )
+    pad_to_max_length: bool = field(
+        default=False,
+        metadata={
+            "help": "Whether to pad all samples to `max_seq_length`. "
+            "If False, will pad the samples dynamically when batching to the maximum length in the batch."
+        },
+    )
+
+    def __post_init__(self):
+        if self.dataset_name is None and self.train_file is None and self.validation_file is None:
+            raise ValueError("Need either a dataset name or a training/validation file.")
+        else:
+            if self.train_file is not None:
+                extension = self.train_file.split(".")[-1]
+                assert extension in ["csv", "json", "txt"], "`train_file` should be a csv, a json or a txt file."
+            if self.validation_file is not None:
+                extension = self.validation_file.split(".")[-1]
+                assert extension in ["csv", "json", "txt"], "`validation_file` should be a csv, a json or a txt file."
+
+
+# Adapted from transformers/data/data_collator.py
+# Letting here for now, let's discuss where it should live
+@dataclass
+class FlaxDataCollatorForLanguageModeling:
+    """
+    Data collator used for language modeling. Inputs are dynamically padded to the maximum length of a batch if they
+    are not all of the same length.
+
+    Args:
+        tokenizer (:class:`~transformers.PreTrainedTokenizer` or :class:`~transformers.PreTrainedTokenizerFast`):
+            The tokenizer used for encoding the data.
+        mlm (:obj:`bool`, `optional`, defaults to :obj:`True`):
+            Whether or not to use masked language modeling. If set to :obj:`False`, the labels are the same as the
+            inputs with the padding tokens ignored (by setting them to -100). Otherwise, the labels are -100 for
+            non-masked tokens and the value to predict for the masked token.
+        mlm_probability (:obj:`float`, `optional`, defaults to 0.15):
+            The probability with which to (randomly) mask tokens in the input, when :obj:`mlm` is set to :obj:`True`.
+
+    .. note::
+
+        For best performance, this data collator should be used with a dataset having items that are dictionaries or
+        BatchEncoding, with the :obj:`"special_tokens_mask"` key, as returned by a
+        :class:`~transformers.PreTrainedTokenizer` or a :class:`~transformers.PreTrainedTokenizerFast` with the
+        argument :obj:`return_special_tokens_mask=True`.
+    """
+
+    tokenizer: PreTrainedTokenizerBase
+    mlm: bool = True
+    mlm_probability: float = 0.15
+
+    def __post_init__(self):
+        if self.mlm and self.tokenizer.mask_token is None:
+            raise ValueError(
+                "This tokenizer does not have a mask token which is necessary for masked language modeling. "
+                "You should pass `mlm=False` to train on causal language modeling instead."
+            )
+
+    def __call__(self, examples: List[Dict[str, np.ndarray]], pad_to_multiple_of: int) -> Dict[str, np.ndarray]:
+        # Handle dict or lists with proper padding and conversion to tensor.
+        batch = self.tokenizer.pad(examples, pad_to_multiple_of=pad_to_multiple_of, return_tensors=TensorType.NUMPY)
+
+        # If special token mask has been preprocessed, pop it from the dict.
+        special_tokens_mask = batch.pop("special_tokens_mask", None)
+        if self.mlm:
+            batch["input_ids"], batch["labels"] = self.mask_tokens(
+                batch["input_ids"], special_tokens_mask=special_tokens_mask
+            )
+        else:
+            labels = batch["input_ids"].copy()
+            if self.tokenizer.pad_token_id is not None:
+                labels[labels == self.tokenizer.pad_token_id] = -100
+            batch["labels"] = labels
+        return batch
+
+    def mask_tokens(
+        self, inputs: np.ndarray, special_tokens_mask: Optional[np.ndarray]
+    ) -> Tuple[jnp.ndarray, jnp.ndarray]:
+        """
+        Prepare masked tokens inputs/labels for masked language modeling: 80% MASK, 10% random, 10% original.
+        """
+        labels = inputs.copy()
+        # We sample a few tokens in each sequence for MLM training (with probability `self.mlm_probability`)
+        probability_matrix = np.full(labels.shape, self.mlm_probability)
+        special_tokens_mask = special_tokens_mask.astype("bool")
+
+        probability_matrix[special_tokens_mask] = 0.0
+        masked_indices = np.random.binomial(1, probability_matrix).astype("bool")
+        labels[~masked_indices] = -100  # We only compute loss on masked tokens
+
+        # 80% of the time, we replace masked input tokens with tokenizer.mask_token ([MASK])
+        indices_replaced = np.random.binomial(1, np.full(labels.shape, 0.8)).astype("bool") & masked_indices
+        inputs[indices_replaced] = self.tokenizer.convert_tokens_to_ids(self.tokenizer.mask_token)
+
+        # 10% of the time, we replace masked input tokens with random word
+        indices_random = np.random.binomial(1, np.full(labels.shape, 0.5)).astype("bool")
+        indices_random &= masked_indices & ~indices_replaced
+
+        random_words = np.random.randint(self.tokenizer.vocab_size, size=labels.shape, dtype="i4")
+        inputs[indices_random] = random_words[indices_random]
+
+        # The rest of the time (10% of the time) we keep the masked input tokens unchanged
+        return inputs, labels
+
+
+def create_learning_rate_scheduler(
+    factors="constant * linear_warmup * rsqrt_decay",
+    base_learning_rate=0.5,
+    warmup_steps=1000,
+    decay_factor=0.5,
+    steps_per_decay=20000,
+    steps_per_cycle=100000,
+):
+    """Creates learning rate schedule.
+    Interprets factors in the factors string which can consist of:
+    * constant: interpreted as the constant value,
+    * linear_warmup: interpreted as linear warmup until warmup_steps,
+    * rsqrt_decay: divide by square root of max(step, warmup_steps)
+    * rsqrt_normalized_decay: divide by square root of max(step/warmup_steps, 1)
+    * decay_every: Every k steps decay the learning rate by decay_factor.
+    * cosine_decay: Cyclic cosine decay, uses steps_per_cycle parameter.
+    Args:
+      factors: string, factors separated by "*" that defines the schedule.
+      base_learning_rate: float, the starting constant for the lr schedule.
+      warmup_steps: int, how many steps to warm up for in the warmup schedule.
+      decay_factor: float, the amount to decay the learning rate by.
+      steps_per_decay: int, how often to decay the learning rate.
+      steps_per_cycle: int, steps per cycle when using cosine decay.
+    Returns:
+      a function learning_rate(step): float -> {"learning_rate": float}, the
+      step-dependent lr.
+    """
+    factors = [n.strip() for n in factors.split("*")]
+
+    def step_fn(step):
+        """Step to learning rate function."""
+        ret = 1.0
+        for name in factors:
+            if name == "constant":
+                ret *= base_learning_rate
+            elif name == "linear_warmup":
+                ret *= jnp.minimum(1.0, step / warmup_steps)
+            elif name == "rsqrt_decay":
+                ret /= jnp.sqrt(jnp.maximum(step, warmup_steps))
+            elif name == "rsqrt_normalized_decay":
+                ret *= jnp.sqrt(warmup_steps)
+                ret /= jnp.sqrt(jnp.maximum(step, warmup_steps))
+            elif name == "decay_every":
+                ret *= decay_factor ** (step // steps_per_decay)
+            elif name == "cosine_decay":
+                progress = jnp.maximum(0.0, (step - warmup_steps) / float(steps_per_cycle))
+                ret *= jnp.maximum(0.0, 0.5 * (1.0 + jnp.cos(jnp.pi * (progress % 1.0))))
+            else:
+                raise ValueError("Unknown factor %s." % name)
+        return jnp.asarray(ret, dtype=jnp.float32)
+
+    return step_fn
+
+
+def compute_metrics(logits, labels, weights, label_smoothing=0.0):
+    """Compute summary metrics."""
+    loss, normalizer = cross_entropy(logits, labels, weights, label_smoothing)
+    acc, _ = accuracy(logits, labels, weights)
+    metrics = {"loss": loss, "accuracy": acc, "normalizer": normalizer}
+    metrics = jax.lax.psum(metrics, axis_name="batch")
+    return metrics
+
+
+def accuracy(logits, targets, weights=None):
+    """Compute weighted accuracy for log probs and targets.
+    Args:
+     logits: [batch, length, num_classes] float array.
+     targets: categorical targets [batch, length] int array.
+     weights: None or array of shape [batch, length]
+    Returns:
+      Tuple of scalar loss and batch normalizing factor.
+    """
+    if logits.ndim != targets.ndim + 1:
+        raise ValueError(
+            "Incorrect shapes. Got shape %s logits and %s targets" % (str(logits.shape), str(targets.shape))
+        )
+
+    loss = jnp.equal(jnp.argmax(logits, axis=-1), targets)
+    loss *= weights
+
+    return loss.sum(), weights.sum()
+
+
+def cross_entropy(logits, targets, weights=None, label_smoothing=0.0):
+    """Compute cross entropy and entropy for log probs and targets.
+    Args:
+     logits: [batch, length, num_classes] float array.
+     targets: categorical targets [batch, length] int array.
+     weights: None or array of shape [batch, length]
+     label_smoothing: label smoothing constant, used to determine the on and off values.
+    Returns:
+      Tuple of scalar loss and batch normalizing factor.
+    """
+    if logits.ndim != targets.ndim + 1:
+        raise ValueError(
+            "Incorrect shapes. Got shape %s logits and %s targets" % (str(logits.shape), str(targets.shape))
+        )
+
+    vocab_size = logits.shape[-1]
+    confidence = 1.0 - label_smoothing
+    low_confidence = (1.0 - confidence) / (vocab_size - 1)
+    normalizing_constant = -(
+        confidence * jnp.log(confidence) + (vocab_size - 1) * low_confidence * jnp.log(low_confidence + 1e-20)
+    )
+    soft_targets = common_utils.onehot(targets, vocab_size, on_value=confidence, off_value=low_confidence)
+
+    loss = -jnp.sum(soft_targets * log_softmax(logits), axis=-1)
+    loss = loss - normalizing_constant
+
+    if weights is not None:
+        loss = loss * weights
+        normalizing_factor = weights.sum()
+    else:
+        normalizing_factor = np.prod(targets.shape)
+
+    return loss.sum(), normalizing_factor
+
+
+def training_step(optimizer, batch, dropout_rng):
+    dropout_rng, new_dropout_rng = jax.random.split(dropout_rng)
+
+    def loss_fn(params):
+        targets = batch.pop("labels")
+
+        # Hide away tokens which doesn't participate in the optimization
+        token_mask = jnp.where(targets > 0, 1.0, 0.0)
+
+        logits = model(**batch, params=params, dropout_rng=dropout_rng, train=True)[0]
+        loss, weight_sum = cross_entropy(logits, targets, token_mask)
+        return loss / weight_sum
+
+    step = optimizer.state.step
+    lr = lr_scheduler_fn(step)
+    grad_fn = jax.value_and_grad(loss_fn)
+    loss, grad = grad_fn(optimizer.target)
+    grad = jax.lax.pmean(grad, "batch")
+    optimizer = optimizer.apply_gradient(grad, learning_rate=lr)
+
+    return loss, optimizer, new_dropout_rng
+
+
+def eval_step(params, batch):
+    """
+    Calculate evaluation metrics on a batch.
+    """
+    targets = batch.pop("labels")
+
+    # Hide away tokens which doesn't participate in the optimization
+    token_mask = jnp.where(targets > 0, 1.0, 0.0)
+    logits = model(**batch, params=params, train=False)[0]
+
+    return compute_metrics(logits, targets, token_mask)
+
+
+def generate_batch_splits(samples_idx: jnp.ndarray, batch_size: int) -> jnp.ndarray:
+    nb_samples = len(samples_idx)
+    samples_to_remove = nb_samples % batch_size
+
+    if samples_to_remove != 0:
+        samples_idx = samples_idx[:-samples_to_remove]
+    sections_split = nb_samples // batch_size
+    batch_idx = np.split(samples_idx, sections_split)
+    return batch_idx
+
+
+if __name__ == "__main__":
+    # See all possible arguments in src/transformers/training_args.py
+    # or by passing the --help flag to this script.
+    # We now keep distinct sets of args, for a cleaner separation of concerns.
+
+    parser = HfArgumentParser((ModelArguments, DataTrainingArguments, TrainingArguments))
+    if len(sys.argv) == 2 and sys.argv[1].endswith(".json"):
+        # If we pass only one argument to the script and it's the path to a json file,
+        # let's parse it to get our arguments.
+        model_args, data_args, training_args = parser.parse_json_file(json_file=os.path.abspath(sys.argv[1]))
+    else:
+        model_args, data_args, training_args = parser.parse_args_into_dataclasses()
+
+    if (
+        os.path.exists(training_args.output_dir)
+        and os.listdir(training_args.output_dir)
+        and training_args.do_train
+        and not training_args.overwrite_output_dir
+    ):
+        raise ValueError(
+            f"Output directory ({training_args.output_dir}) already exists and is not empty."
+            "Use --overwrite_output_dir to overcome."
+        )
+
+    # Setup logging
+    logging.basicConfig(
+        format="%(asctime)s - %(levelname)s - %(name)s -   %(message)s",
+        level="NOTSET",
+        datefmt="[%X]",
+    )
+
+    # Log on each process the small summary:
+    logger = logging.getLogger(__name__)
+    logger.warning(
+        f"Process rank: {training_args.local_rank}, device: {training_args.device}, n_gpu: {training_args.n_gpu}"
+        + f"distributed training: {bool(training_args.local_rank != -1)}, 16-bits training: {training_args.fp16}"
+    )
+
+    # Set the verbosity to info of the Transformers logger (on main process only):
+    logger.info("Training/evaluation parameters %s", training_args)
+
+    # Set seed before initializing model.
+    set_seed(training_args.seed)
+
+    # Get the datasets: you can either provide your own CSV/JSON/TXT training and evaluation files (see below)
+    # or just provide the name of one of the public datasets available on the hub at https://huggingface.co/datasets/
+    # (the dataset will be downloaded automatically from the datasets Hub).
+    #
+    # For CSV/JSON files, this script will use the column called 'text' or the first column if no column called
+    # 'text' is found. You can easily tweak this behavior (see below).
+    #
+    # In distributed training, the load_dataset function guarantees that only one local process can concurrently
+    # download the dataset.
+    if data_args.dataset_name is not None:
+        # Downloading and loading a dataset from the hub.
+        datasets = load_dataset(data_args.dataset_name, data_args.dataset_config_name)
+    else:
+        data_files = {}
+        if data_args.train_file is not None:
+            data_files["train"] = data_args.train_file
+        if data_args.validation_file is not None:
+            data_files["validation"] = data_args.validation_file
+        extension = data_args.train_file.split(".")[-1]
+        if extension == "txt":
+            extension = "text"
+        datasets = load_dataset(extension, data_files=data_files)
+    # See more about loading any type of standard or custom dataset (from files, python dict, pandas DataFrame, etc) at
+    # https://huggingface.co/docs/datasets/loading_datasets.html.
+
+    # Load pretrained model and tokenizer
+
+    # Distributed training:
+    # The .from_pretrained methods guarantee that only one local process can concurrently
+    # download model & vocab.
+    if model_args.config_name:
+        config = AutoConfig.from_pretrained(model_args.config_name, cache_dir=model_args.cache_dir)
+    elif model_args.model_name_or_path:
+        config = AutoConfig.from_pretrained(model_args.model_name_or_path, cache_dir=model_args.cache_dir)
+    else:
+        config = CONFIG_MAPPING[model_args.model_type]()
+        logger.warning("You are instantiating a new config instance from scratch.")
+
+    if model_args.tokenizer_name:
+        tokenizer = AutoTokenizer.from_pretrained(
+            model_args.tokenizer_name, cache_dir=model_args.cache_dir, use_fast=model_args.use_fast_tokenizer
+        )
+    elif model_args.model_name_or_path:
+        tokenizer = AutoTokenizer.from_pretrained(
+            model_args.model_name_or_path, cache_dir=model_args.cache_dir, use_fast=model_args.use_fast_tokenizer
+        )
+    else:
+        raise ValueError(
+            "You are instantiating a new tokenizer from scratch. This is not supported by this script."
+            "You can do it from another script, save it, and load it from here, using --tokenizer_name."
+        )
+
+    # Preprocessing the datasets.
+    # First we tokenize all the texts.
+    if training_args.do_train:
+        column_names = datasets["train"].column_names
+    else:
+        column_names = datasets["validation"].column_names
+    text_column_name = "text" if "text" in column_names else column_names[0]
+
+    padding = "max_length" if data_args.pad_to_max_length else False
+
+    def tokenize_function(examples):
+        # Remove empty lines
+        examples["text"] = [line for line in examples["text"] if len(line) > 0 and not line.isspace()]
+        return tokenizer(
+            examples["text"],
+            return_special_tokens_mask=True,
+            padding=padding,
+            truncation=True,
+            max_length=data_args.max_seq_length,
+        )
+
+    tokenized_datasets = datasets.map(
+        tokenize_function,
+        batched=True,
+        num_proc=data_args.preprocessing_num_workers,
+        remove_columns=[text_column_name],
+        load_from_cache_file=not data_args.overwrite_cache,
+    )
+
+    # Enable tensorboard only on the master node
+    if has_tensorboard and jax.host_id() == 0:
+        summary_writer = SummaryWriter(log_dir=Path(training_args.output_dir).joinpath("logs").as_posix())
+
+    # Data collator
+    # This one will take care of randomly masking the tokens.
+    data_collator = FlaxDataCollatorForLanguageModeling(tokenizer=tokenizer, mlm_probability=data_args.mlm_probability)
+
+    # Initialize our training
+    rng = jax.random.PRNGKey(training_args.seed)
+    dropout_rngs = jax.random.split(rng, jax.local_device_count())
+
+    model = FlaxBertForMaskedLM.from_pretrained(
+        "bert-base-cased",
+        dtype=jnp.float32,
+        input_shape=(training_args.train_batch_size, config.max_position_embeddings),
+        seed=training_args.seed,
+        dropout_rate=0.1,
+    )
+
+    # Setup optimizer
+    optimizer = Adam(
+        learning_rate=training_args.learning_rate,
+        weight_decay=training_args.weight_decay,
+        beta1=training_args.adam_beta1,
+        beta2=training_args.adam_beta2,
+    ).create(model.params)
+
+    # Create learning rate scheduler
+    lr_scheduler_fn = create_learning_rate_scheduler(
+        base_learning_rate=training_args.learning_rate, warmup_steps=training_args.warmup_steps
+    )
+
+    # Create parallel version of the training and evaluation steps
+    p_training_step = jax.pmap(training_step, "batch", donate_argnums=(0,))
+    p_eval_step = jax.pmap(eval_step, "batch", donate_argnums=(0,))
+
+    # Replicate the optimizer on each device
+    optimizer = jax_utils.replicate(optimizer)
+
+    # Store some constant
+    nb_epochs = int(training_args.num_train_epochs)
+    batch_size = int(training_args.train_batch_size)
+    eval_batch_size = int(training_args.eval_batch_size)
+
+    epochs = tqdm(range(nb_epochs), desc=f"Epoch ... (1/{nb_epochs})", position=0)
+    for epoch in epochs:
+
+        # ======================== Training ================================
+        # Create sampling rng
+        rng, training_rng, eval_rng = jax.random.split(rng, 3)
+
+        # Generate an epoch by shuffling sampling indices from the train dataset
+        nb_training_samples = len(tokenized_datasets["train"])
+        training_samples_idx = jax.random.permutation(training_rng, jnp.arange(nb_training_samples))
+        training_batch_idx = generate_batch_splits(training_samples_idx, batch_size)
+
+        # Gather the indexes for creating the batch and do a training step
+        for batch_idx in tqdm(training_batch_idx, desc="Training...", position=1):
+            samples = [tokenized_datasets["train"][int(idx)] for idx in batch_idx]
+            model_inputs = data_collator(samples, pad_to_multiple_of=16)
+
+            # Model forward
+            model_inputs = common_utils.shard(model_inputs.data)
+            loss, optimizer, dropout_rngs = p_training_step(optimizer, model_inputs, dropout_rngs)
+
+        epochs.write(f"Loss: {loss}")
+
+        # ======================== Evaluating ==============================
+        nb_eval_samples = len(tokenized_datasets["test"])
+        eval_samples_idx = jnp.arange(nb_eval_samples)
+        eval_batch_idx = generate_batch_splits(eval_samples_idx, eval_batch_size)
+
+        eval_metrics = []
+        for i, batch_idx in enumerate(tqdm(eval_batch_idx, desc="Evaluating ...", position=2)):
+            samples = [tokenized_datasets["test"][int(idx)] for idx in batch_idx]
+            model_inputs = data_collator(samples, pad_to_multiple_of=16)
+
+            # Model forward
+            model_inputs = common_utils.shard(model_inputs.data)
+            metrics = p_eval_step(optimizer.target, model_inputs)
+            eval_metrics.append(metrics)
+
+        eval_metrics_np = get_metrics(eval_metrics)
+        eval_metrics_np = jax.tree_map(jnp.sum, eval_metrics_np)
+        eval_normalizer = eval_metrics_np.pop("normalizer")
+        eval_summary = jax.tree_map(lambda x: x / eval_normalizer, eval_metrics_np)
+
+        # Update progress bar
+        epochs.desc = (
+            f"Epoch... ({epoch + 1}/{nb_epochs} | Loss: {eval_summary['loss']}, Acc: {eval_summary['accuracy']})"
+        )
+
+        # Save metrics
+        if has_tensorboard and jax.host_id() == 0:
+            for name, value in eval_summary.items():
+                summary_writer.scalar(name, value, epoch)
@@ -281,7 +281,7 @@ def main():
    # Add the chinese references if provided
    if data_args.train_ref_file is not None:
        tokenized_datasets["train"] = add_chinese_references(tokenized_datasets["train"], data_args.train_ref_file)
-    if data_args.valid_ref_file is not None:
+    if data_args.validation_ref_file is not None:
        tokenized_datasets["validation"] = add_chinese_references(
            tokenized_datasets["validation"], data_args.validation_ref_file
        )
@@ -0,0 +1,21 @@
+<!---
+Copyright 2020 The HuggingFace Team. All rights reserved.
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+    http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+-->
+
+# Legacy examples
+
+This folder contains examples which are not actively maintained (mostly contributed by the community).
+
+Using these examples together with a recent version of the library usually requires to make small (sometimes big) adaptations to get the scripts working.
@@ -21,7 +21,7 @@ mkdir -p $OUTPUT_DIR
 # Add parent directory to python path to access lightning_base.py
 export PYTHONPATH="../":"${PYTHONPATH}"

-python3 run_pl_glue.py --gpus 1 --data_dir $DATA_DIR \
+python3 run_glue.py --gpus 1 --data_dir $DATA_DIR \
 --task $TASK \
 --model_name_or_path $BERT_MODEL \
 --output_dir $OUTPUT_DIR \
@@ -31,7 +31,7 @@ mkdir -p $OUTPUT_DIR
 # Add parent directory to python path to access lightning_base.py
 export PYTHONPATH="../":"${PYTHONPATH}"

-python3 run_pl_ner.py --data_dir ./ \
+python3 run_ner.py --data_dir ./ \
 --labels ./labels.txt \
 --model_name_or_path $BERT_MODEL \
 --output_dir $OUTPUT_DIR \
@@ -26,7 +26,7 @@ export SEED=1
 # Add parent directory to python path to access lightning_base.py
 export PYTHONPATH="../":"${PYTHONPATH}"

-python3 run_pl_ner.py --data_dir ./ \
+python3 run_ner.py --data_dir ./ \
 --task_type POS \
 --model_name_or_path $BERT_MODEL \
 --output_dir $OUTPUT_DIR \
@@ -0,0 +1,229 @@
+## Token classification
+
+Based on the scripts [`run_ner.py`](https://github.com/huggingface/transformers/blob/master/examples/contrib/legacy/token-classification/run_ner.py).
+
+The following examples are covered in this section:
+
+* NER on the GermEval 2014 (German NER) dataset
+* Emerging and Rare Entities task: WNUT’17 (English NER) dataset
+
+Details and results for the fine-tuning provided by @stefan-it.
+
+### GermEval 2014 (German NER) dataset
+
+#### Data (Download and pre-processing steps)
+
+Data can be obtained from the [GermEval 2014](https://sites.google.com/site/germeval2014ner/data) shared task page.
+
+Here are the commands for downloading and pre-processing train, dev and test datasets. The original data format has four (tab-separated) columns, in a pre-processing step only the two relevant columns (token and outer span NER annotation) are extracted:
+
+```bash
+curl -L 'https://drive.google.com/uc?export=download&id=1Jjhbal535VVz2ap4v4r_rN1UEHTdLK5P' \
+| grep -v "^#" | cut -f 2,3 | tr '\t' ' ' > train.txt.tmp
+curl -L 'https://drive.google.com/uc?export=download&id=1ZfRcQThdtAR5PPRjIDtrVP7BtXSCUBbm' \
+| grep -v "^#" | cut -f 2,3 | tr '\t' ' ' > dev.txt.tmp
+curl -L 'https://drive.google.com/uc?export=download&id=1u9mb7kNJHWQCWyweMDRMuTFoOHOfeBTH' \
+| grep -v "^#" | cut -f 2,3 | tr '\t' ' ' > test.txt.tmp
+```
+
+The GermEval 2014 dataset contains some strange "control character" tokens like `'\x96', '\u200e', '\x95', '\xad' or '\x80'`.
+One problem with these tokens is, that `BertTokenizer` returns an empty token for them, resulting in misaligned `InputExample`s.
+The `preprocess.py` script located in the `scripts` folder a) filters these tokens and b) splits longer sentences into smaller ones (once the max. subtoken length is reached).
+
+Let's define some variables that we need for further pre-processing steps and training the model:
+
+```bash
+export MAX_LENGTH=128
+export BERT_MODEL=bert-base-multilingual-cased
+```
+
+Run the pre-processing script on training, dev and test datasets:
+
+```bash
+python3 scripts/preprocess.py train.txt.tmp $BERT_MODEL $MAX_LENGTH > train.txt
+python3 scripts/preprocess.py dev.txt.tmp $BERT_MODEL $MAX_LENGTH > dev.txt
+python3 scripts/preprocess.py test.txt.tmp $BERT_MODEL $MAX_LENGTH > test.txt
+```
+
+The GermEval 2014 dataset has much more labels than CoNLL-2002/2003 datasets, so an own set of labels must be used:
+
+```bash
+cat train.txt dev.txt test.txt | cut -d " " -f 2 | grep -v "^$"| sort | uniq > labels.txt
+```
+
+#### Prepare the run
+
+Additional environment variables must be set:
+
+```bash
+export OUTPUT_DIR=germeval-model
+export BATCH_SIZE=32
+export NUM_EPOCHS=3
+export SAVE_STEPS=750
+export SEED=1
+```
+
+#### Run the Pytorch version
+
+To start training, just run:
+
+```bash
+python3 run_ner.py --data_dir ./ \
+--labels ./labels.txt \
+--model_name_or_path $BERT_MODEL \
+--output_dir $OUTPUT_DIR \
+--max_seq_length  $MAX_LENGTH \
+--num_train_epochs $NUM_EPOCHS \
+--per_device_train_batch_size $BATCH_SIZE \
+--save_steps $SAVE_STEPS \
+--seed $SEED \
+--do_train \
+--do_eval \
+--do_predict
+```
+
+If your GPU supports half-precision training, just add the `--fp16` flag. After training, the model will be both evaluated on development and test datasets.
+
+#### JSON-based configuration file
+
+Instead of passing all parameters via commandline arguments, the `run_ner.py` script also supports reading parameters from a json-based configuration file:
+
+```json
+{
+    "data_dir": ".",
+    "labels": "./labels.txt",
+    "model_name_or_path": "bert-base-multilingual-cased",
+    "output_dir": "germeval-model",
+    "max_seq_length": 128,
+    "num_train_epochs": 3,
+    "per_device_train_batch_size": 32,
+    "save_steps": 750,
+    "seed": 1,
+    "do_train": true,
+    "do_eval": true,
+    "do_predict": true
+}
+```
+
+It must be saved with a `.json` extension and can be used by running `python3 run_ner.py config.json`.
+
+#### Evaluation
+
+Evaluation on development dataset outputs the following for our example:
+
+```bash
+10/04/2019 00:42:06 - INFO - __main__ -   ***** Eval results  *****
+10/04/2019 00:42:06 - INFO - __main__ -     f1 = 0.8623348017621146
+10/04/2019 00:42:06 - INFO - __main__ -     loss = 0.07183869666975543
+10/04/2019 00:42:06 - INFO - __main__ -     precision = 0.8467916366258111
+10/04/2019 00:42:06 - INFO - __main__ -     recall = 0.8784592370979806
+```
+
+On the test dataset the following results could be achieved:
+
+```bash
+10/04/2019 00:42:42 - INFO - __main__ -   ***** Eval results  *****
+10/04/2019 00:42:42 - INFO - __main__ -     f1 = 0.8614389652384803
+10/04/2019 00:42:42 - INFO - __main__ -     loss = 0.07064602487454782
+10/04/2019 00:42:42 - INFO - __main__ -     precision = 0.8604651162790697
+10/04/2019 00:42:42 - INFO - __main__ -     recall = 0.8624150210424085
+```
+
+### Emerging and Rare Entities task: WNUT’17 (English NER) dataset
+
+Description of the WNUT’17 task from the [shared task website](http://noisy-text.github.io/2017/index.html):
+
+> The WNUT’17 shared task focuses on identifying unusual, previously-unseen entities in the context of emerging discussions.
+> Named entities form the basis of many modern approaches to other tasks (like event clustering and summarization), but recall on
+> them is a real problem in noisy text - even among annotators. This drop tends to be due to novel entities and surface forms.
+
+Six labels are available in the dataset. An overview can be found on this [page](http://noisy-text.github.io/2017/files/).
+
+#### Data (Download and pre-processing steps)
+
+The dataset can be downloaded from the [official GitHub](https://github.com/leondz/emerging_entities_17) repository.
+
+The following commands show how to prepare the dataset for fine-tuning:
+
+```bash
+mkdir -p data_wnut_17
+
+curl -L 'https://github.com/leondz/emerging_entities_17/raw/master/wnut17train.conll'  | tr '\t' ' ' > data_wnut_17/train.txt.tmp
+curl -L 'https://github.com/leondz/emerging_entities_17/raw/master/emerging.dev.conll' | tr '\t' ' ' > data_wnut_17/dev.txt.tmp
+curl -L 'https://raw.githubusercontent.com/leondz/emerging_entities_17/master/emerging.test.annotated' | tr '\t' ' ' > data_wnut_17/test.txt.tmp
+```
+
+Let's define some variables that we need for further pre-processing steps:
+
+```bash
+export MAX_LENGTH=128
+export BERT_MODEL=bert-large-cased
+```
+
+Here we use the English BERT large model for fine-tuning.
+The `preprocess.py` scripts splits longer sentences into smaller ones (once the max. subtoken length is reached):
+
+```bash
+python3 scripts/preprocess.py data_wnut_17/train.txt.tmp $BERT_MODEL $MAX_LENGTH > data_wnut_17/train.txt
+python3 scripts/preprocess.py data_wnut_17/dev.txt.tmp $BERT_MODEL $MAX_LENGTH > data_wnut_17/dev.txt
+python3 scripts/preprocess.py data_wnut_17/test.txt.tmp $BERT_MODEL $MAX_LENGTH > data_wnut_17/test.txt
+```
+
+In the last pre-processing step, the `labels.txt` file needs to be generated. This file contains all available labels:
+
+```bash
+cat data_wnut_17/train.txt data_wnut_17/dev.txt data_wnut_17/test.txt | cut -d " " -f 2 | grep -v "^$"| sort | uniq > data_wnut_17/labels.txt
+```
+
+#### Run the Pytorch version
+
+Fine-tuning with the PyTorch version can be started using the `run_ner.py` script. In this example we use a JSON-based configuration file.
+
+This configuration file looks like:
+
+```json
+{
+    "data_dir": "./data_wnut_17",
+    "labels": "./data_wnut_17/labels.txt",
+    "model_name_or_path": "bert-large-cased",
+    "output_dir": "wnut-17-model-1",
+    "max_seq_length": 128,
+    "num_train_epochs": 3,
+    "per_device_train_batch_size": 32,
+    "save_steps": 425,
+    "seed": 1,
+    "do_train": true,
+    "do_eval": true,
+    "do_predict": true,
+    "fp16": false
+}
+```
+
+If your GPU supports half-precision training, please set `fp16` to `true`.
+
+Save this JSON-based configuration under `wnut_17.json`. The fine-tuning can be started with `python3 run_ner_old.py wnut_17.json`.
+
+#### Evaluation
+
+Evaluation on development dataset outputs the following:
+
+```bash
+05/29/2020 23:33:44 - INFO - __main__ -   ***** Eval results *****
+05/29/2020 23:33:44 - INFO - __main__ -     eval_loss = 0.26505235286212275
+05/29/2020 23:33:44 - INFO - __main__ -     eval_precision = 0.7008264462809918
+05/29/2020 23:33:44 - INFO - __main__ -     eval_recall = 0.507177033492823
+05/29/2020 23:33:44 - INFO - __main__ -     eval_f1 = 0.5884802220680084
+05/29/2020 23:33:44 - INFO - __main__ -     epoch = 3.0
+```
+
+On the test dataset the following results could be achieved:
+
+```bash
+05/29/2020 23:33:44 - INFO - transformers.trainer -   ***** Running Prediction *****
+05/29/2020 23:34:02 - INFO - __main__ -     eval_loss = 0.30948806500973547
+05/29/2020 23:34:02 - INFO - __main__ -     eval_precision = 0.5840108401084011
+05/29/2020 23:34:02 - INFO - __main__ -     eval_recall = 0.3994439295644115
+05/29/2020 23:34:02 - INFO - __main__ -     eval_f1 = 0.47440836543753434
+```
+
+WNUT’17 is a very difficult task. Current state-of-the-art results on this dataset can be found [here](http://nlpprogress.com/english/named_entity_recognition.html).
@@ -20,7 +20,7 @@ export NUM_EPOCHS=3
 export SAVE_STEPS=750
 export SEED=1

-python3 run_ner_old.py \
+python3 run_ner.py \
 --task_type NER \
 --data_dir . \
 --labels ./labels.txt \
@@ -21,7 +21,7 @@ export NUM_EPOCHS=3
 export SAVE_STEPS=750
 export SEED=1

-python3 run_ner_old.py \
+python3 run_ner.py \
 --task_type Chunk \
 --data_dir . \
 --model_name_or_path $BERT_MODEL \
@@ -21,7 +21,7 @@ export NUM_EPOCHS=3
 export SAVE_STEPS=750
 export SEED=1

-python3 run_ner_old.py \
+python3 run_ner.py \
 --task_type POS \
 --data_dir . \
 --model_name_or_path $BERT_MODEL \
@@ -1,3 +1,19 @@
+<!---
+Copyright 2020 The HuggingFace Team. All rights reserved.
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+    http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+-->
+
 ## Multiple Choice

 Based on the script [`run_multiple_choice.py`]().
@@ -0,0 +1,2 @@
+sentencepiece != 0.1.92
+protobuf
@@ -1,8 +1,29 @@
+<!---
+Copyright 2020 The HuggingFace Team. All rights reserved.

+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+    http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+-->

 ## SQuAD

-Based on the script [`run_squad.py`](https://github.com/huggingface/transformers/blob/master/examples/question-answering/run_squad.py).
+Based on the script [`run_qa.py`](https://github.com/huggingface/transformers/blob/master/examples/question-answering/run_qa.py).
+
+**Note:** This script only works with models that have a fast tokenizer (backed by the 🤗 Tokenizers library) as it
+uses special features of those tokenizers. You can check if your favorite model has a fast tokenizer in
+[this table](https://huggingface.co/transformers/index.html#bigtable), if it doesn't you can still use the old version
+of the script.
+
+The old version of this script can be found [here](https://github.com/huggingface/transformers/blob/master/examples/contrib/legacy/question-answering/run_squad.py).

 #### Fine-tuning BERT on SQuAD1.0

@@ -0,0 +1 @@
+datasets >= 1.1.3
@@ -76,9 +76,7 @@ def postprocess_qa_predictions(
    assert len(predictions) == 2, "`predictions` should be a tuple with two elements (start_logits, end_logits)."
    all_start_logits, all_end_logits = predictions

-    assert len(predictions[0]) == len(
-        features
-    ), f"Got {len(predictions[0])} predicitions and {len(features)} features."
+    assert len(predictions[0]) == len(features), f"Got {len(predictions[0])} predictions and {len(features)} features."

    # Build a map example to its corresponding features.
    example_id_to_index = {k: i for i, k in enumerate(examples["id"])}
@@ -118,7 +116,7 @@ def postprocess_qa_predictions(

            # Update minimum null prediction.
            feature_null_score = start_logits[0] + end_logits[0]
-            if min_null_prediction is None or min_null_prediction["score"] < feature_null_score:
+            if min_null_prediction is None or min_null_prediction["score"] > feature_null_score:
                min_null_prediction = {
                    "offsets": (0, 0),
                    "score": feature_null_score,
@@ -0,0 +1,28 @@
+<!---
+Copyright 2020 The HuggingFace Team. All rights reserved.
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+    http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+-->
+
+# Research projects
+
+This folder contains various research projects using 🤗 Transformers. They are not maintained and require a specific
+version of 🤗 Transformers that is indicated in the requirements file of each folder. Updating them to the most recent version of the library will require some work.
+
+To use any of them, just run the command
+```
+pip install -r requirements.txt
+```
+inside the folder of your choice.
+
+If you need help with any of those, contact the author(s), indicated at the top of the `README` of each folder.
@@ -0,0 +1 @@
+transformers == 3.5.1
@@ -0,0 +1 @@
+transformers == 3.5.1
@@ -1,4 +1,4 @@
-transformers
+transformers == 3.5.1

 # For ROUGE
 nltk
@@ -0,0 +1 @@
+transformers == 3.5.1
@@ -0,0 +1 @@
+transformers == 3.5.1
Author	SHA1	Message	Date
TevenLeScao	7db700e4d3	initial commit	2020-12-15 19:20:33 +01:00
patrickvonplaten	6d12bbefa5	:wqMerge branch 'new_flax_design' of https://github.com/patrickvonplaten/transformers into new_flax_design	2020-12-15 16:24:26 +00:00
patrickvonplaten	fddd073626	fix copies	2020-12-15 16:24:21 +00:00
Patrick von Platen	56fc622b3d	Update src/transformers/modeling_flax_utils.py	2020-12-15 17:11:14 +01:00
patrickvonplaten	22870e3866	add pretrained to init	2020-12-15 16:07:34 +00:00
patrickvonplaten	5d11af74c1	add docs	2020-12-15 16:03:53 +00:00
patrickvonplaten	0a63bd61eb	fix bug	2020-12-15 15:38:50 +00:00
patrickvonplaten	2ef4c11e27	finalize revert	2020-12-15 15:38:16 +00:00
patrickvonplaten	3fb41e14c9	revert tevens changes 2	2020-12-15 15:33:29 +00:00
patrickvonplaten	d16be14cb6	revert tevens changes	2020-12-15 15:30:55 +00:00
patrickvonplaten	0f34499e8e	make 0.3.0 compatible	2020-12-15 14:54:41 +00:00
patrickvonplaten	0f729ba269	update init	2020-12-15 12:36:38 +00:00
Patrick von Platen	8cd2a30cd9	Merge remote-tracking branch 'main/master' into new_flax_design	2020-12-15 00:21:03 +01:00
Patrick von Platen	7f87402089	apply sylvains tips	2020-12-15 00:19:39 +01:00
Patrick von Platen	2a1ac551e9	improve test in flax	2020-12-15 00:12:17 +01:00
patrickvonplaten	f0675a2c38	fix flax from pretrained	2020-12-14 22:51:01 +00:00
Sylvain Gugger	251eb70c97	Also pin TF CPU	2020-12-14 16:17:04 -05:00
Sylvain Gugger	e4ef57a9bb	Pin TF to < 2.4	2020-12-14 16:06:30 -05:00
TevenLeScao	adf4bc6c00	reverted training_args.py changes	2020-12-14 21:46:28 +01:00
TevenLeScao	d8b9fd7931	removed tokenizers warning hack, fixed model re-initialization	2020-12-14 21:42:34 +01:00
TevenLeScao	fcaad14a3a	run_mlm_flax improvements: improper model inputs bugfix + automatic dataset splitting + tokenizers parallelism warning + avoiding warmup_steps=0 bug	2020-12-14 21:01:57 +01:00
TevenLeScao	3bb62e4333	Merge branch 'performer' into new_flax_design	2020-12-14 20:03:33 +01:00
TevenLeScao	1de19cbe23	proper initialization	2020-12-14 19:07:49 +01:00
Julien Plu	df3f4d2aef	Fix T5 and BART for TF (#9063 ) * Fix T5 for graphe compilation+execution * Fix BART * Fix import * Fix naming * fix attribute name * Oops * fix import * fix tests * fix tests * Update test * Add mising import * Address Patrick's comments * Style * Address Patrick's comment	2020-12-14 18:47:00 +01:00
Ahmed ElnaggarandAhmed Elnaggar	a9c8bff724	Add parallelization support for T5EncoderModel (#9082 ) * add model parallelism to T5EncoderModel add model parallelism to T5EncoderModel * remove decoder from T5EncoderModel parallelize * uodate T5EncoderModel docs * Extend T5ModelTest for T5EncoderModel * fix T5Stask using range for get_device_map * fix style Co-authored-by: Ahmed Elnaggar <elnaggar@rostlab.informatik.tu-muenchen.de>	2020-12-14 12:00:45 -05:00
Stas Bekman	b00eb4fb02	Testing Experimental CI Features (#9070 )	2020-12-14 10:34:59 -05:00
Simon Brandeis	74daf1f954	Fixed a broken link in documentation (#9101 )	2020-12-14 09:12:27 -05:00
Navjot	d6af344c9e	correct var name in TrainingArguments docstring (#9096 )	2020-12-14 09:02:54 -05:00
TevenLeScao	754307e57a	proper model initialization/loading	2020-12-14 14:59:31 +01:00
Patrick von Platen	fa1ddced9e	[RAG, Bart] Align RAG, Bart cache with T5 and other models of transformers (#9098 ) * fix rag * fix slow test * fix past in bart	2020-12-14 12:32:26 +01:00
Lysandre Debut	6587cf9f84	Patch *ForCausalLM model (#9092 )	2020-12-14 00:39:55 -05:00
Julien Plu	51d9c569fa	Fix embeddings resizing in TF models (#8657 ) * Resize the biases in same time than the embeddings * Trigger CI * Biases are not reset anymore * Remove get_output_embeddings + better LM model detection in generation utils * Apply style * First test on BERT * Update docstring + new name * Apply the new resizing logic to all the models * fix tests * Apply style * Update the template * Fix naming * Fix naming * Apply style * Apply style * Remove unused import * Revert get_output_embeddings * Trigger CI * Update num parameters * Restore get_output_embeddings in TFPretrainedModel and add comments * Style * Add decoder resizing * Style * Fix tests * Separate bias and decoder resize * Fix tests * Fix tests * Apply style * Add bias resizing in MPNet * Trigger CI * Apply style	2020-12-13 23:05:24 -05:00
TevenLeScao	9a0a30ba80	declaration order fix	2020-12-13 20:38:02 +01:00
TevenLeScao	025af73c6c	initial_evaluation argument	2020-12-13 20:32:58 +01:00
TevenLeScao	e0fcea4dd3	dirty print	2020-12-13 18:59:00 +01:00
TevenLeScao	1581b4b3fd	dirty print	2020-12-13 18:46:50 +01:00
patrickvonplaten	a455dd7cc1	make fix-copies	2020-12-13 17:44:23 +00:00
TevenLeScao	ef167c3b03	smaller splits	2020-12-13 18:31:04 +01:00
TevenLeScao	2aedabbf09	preventing warmup_steps == 0	2020-12-13 15:26:14 +01:00
TevenLeScao	ab2c38e7fd	dirty print	2020-12-13 13:56:14 +01:00
TevenLeScao	87d1edcf59	splits	2020-12-12 21:45:04 +01:00
Patrick von Platen	ff552aee9d	remove Module from inits	2020-12-12 13:39:32 +00:00
Patrick von Platen	a5bc339c4d	fix gelu \| gelu_new	2020-12-12 13:29:41 +00:00
Patrick von Platen	2787f5251b	remove pooled from run_mlm_flax.py`	2020-12-12 12:58:38 +00:00
TevenLeScao	7ae3ed31f0	fixes in run_mlm_flax.py	2020-12-12 13:32:15 +01:00
Julien Chaumond Sylvain Gugger Patrick von Platen	3552d0e0d8	[model_cards] Migrate cards from this repo to model repos on huggingface.co (#9013 ) * rm all model cards * Update the .rst @sgugger it is still not super crystal clear/streamlined so let me know if any ideas to make it simpler * Add a rootlevel README.md with simple instructions/context * Update docs/source/model_sharing.rst Co-authored-by: Sylvain Gugger <35901082+sgugger@users.noreply.github.com> * Apply suggestions from code review Co-authored-by: Sylvain Gugger <35901082+sgugger@users.noreply.github.com> Co-authored-by: Patrick von Platen <patrick.v.platen@gmail.com> * make style * rm all model cards Co-authored-by: Sylvain Gugger <35901082+sgugger@users.noreply.github.com> Co-authored-by: Patrick von Platen <patrick.v.platen@gmail.com>	2020-12-11 18:24:42 -05:00
Sylvain Gugger	29e4597950	Fix min_null_pred in the run_qa script (#9067 )	2020-12-11 16:26:05 -05:00
Patrick von Platen	9cc9f4122e	Make ProphetNetModel really compatible with EncoderDecoder (#9033 ) * improve * finish * upload model * fix lm head * fix test	2020-12-11 16:59:54 +01:00
Patrick von Platen	d655d510b8	last refactor	2020-12-11 15:57:48 +00:00
Patrick von Platen	2e8a3883ac	delete keys file	2020-12-11 15:40:18 +00:00
Patrick von Platen	a69410656a	make fix-copies	2020-12-11 15:39:58 +00:00
Patrick von Platen	b761bc97e7	finish roberta	2020-12-11 15:36:26 +00:00
dependabot[bot]	24f6cdeab6	Bump notebook in /examples/research_projects/movement-pruning/lxmert (#9062 ) Bumps [notebook](https://github.com/jupyter/jupyterhub) from 6.1.4 to 6.1.5. - [Release notes](https://github.com/jupyter/jupyterhub/releases) - [Changelog](https://github.com/jupyterhub/jupyterhub/blob/master/CHECKLIST-Release.md) - [Commits](https://github.com/jupyter/jupyterhub/commits) Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	2020-12-11 10:32:43 -05:00
Lysandre Debut	91fa707217	Remove docs only check (#9065 )	2020-12-11 10:27:31 -05:00
Sylvain Gugger	70527ba694	Fix PreTrainedTokenizer.pad when first inputs are empty (#9018 ) * Fix PreTrainedTokenizer.pad when first inputs are empty * Handle empty inputs case	2020-12-11 10:25:00 -05:00
Sylvain Gugger Lysandre Debut Thomas Wolf	783d7d2629	Reorganize examples (#9010 ) * Reorganize example folder * Continue reorganization * Change requirements for tests * Final cleanup * Finish regroup with tests all passing * Copyright * Requirements and readme * Make a full link for the documentation * Address review comments * Apply suggestions from code review Co-authored-by: Lysandre Debut <lysandre@huggingface.co> * Add symlink * Reorg again * Apply suggestions from code review Co-authored-by: Thomas Wolf <thomwolf@users.noreply.github.com> * Adapt title * Update to new strucutre * Remove test * Update READMEs Co-authored-by: Lysandre Debut <lysandre@huggingface.co> Co-authored-by: Thomas Wolf <thomwolf@users.noreply.github.com>	2020-12-11 10:07:02 -05:00
Suraj Patil	86896de064	update tatoeba workflow (#9051 )	2020-12-11 20:29:15 +05:30
Ganesh KharadandJulien Chaumond	7c8f5f6487	Create README.md (#8096 ) * Create README.md * Fix model card Co-authored-by: Julien Chaumond <julien@huggingface.co>	2020-12-11 09:45:12 -05:00
RamonMamonandJulien Chaumond	5527f78721	Create README.md (#8281 ) * Create README.md * Update model_cards/kiri-ai/distiluse-base-multilingual-cased-et/README.md Co-authored-by: Julien Chaumond <chaumond@gmail.com>	2020-12-11 09:41:29 -05:00
joanginesandJulien Chaumond	c615df7422	Create README.md (#8751 ) * Create README.md * Update model_cards/Cinnamon/electra-small-japanese-generator/README.md Co-authored-by: Julien Chaumond <chaumond@gmail.com>	2020-12-11 09:40:14 -05:00
Ahmed Abdelali Ahmed Abdelali Julien Chaumond	76df559383	QARiB Arabic and dialects models (#8796 ) * Add QARiB models * fix README.md * Fix README.md * Fix README.md * Fix README.md * Fix QARiB files * add models card for QARiB models 860k, 1790k, and 1970k * try to fix PR * re-add files * links aren't allowed here :) Co-authored-by: Ahmed Abdelali <aabdelali@hbku.edu.qa> Co-authored-by: Julien Chaumond <julien@huggingface.co>	2020-12-11 09:38:38 -05:00
moniquebm	b161f1ae54	Update README.md (#8820 )	2020-12-11 09:24:21 -05:00
Panggi Libersa Jasri Akadol	649d389dab	Initial README for `t5-base-indonesian-summarization-cased` model (#9028 ) * Create README.md Initial README for `t5-base-indonesian-summarization-cased` model * Update README for t5-base-indonesian-summarization-cased Typo in README, change from `small` to `base`	2020-12-11 09:18:16 -05:00
Panggi Libersa Jasri Akadol	5e794b6628	Create README.md (#9030 ) Initial README for `t5-small-indonesian-summarization-cased` model	2020-12-11 09:17:29 -05:00
Patrick von Platen	caf25047af	almost finish BERT	2020-12-11 13:35:32 +00:00
Patrick von Platen	73797f1916	make style	2020-12-11 10:32:46 +00:00
Patrick von Platen	467f1a952f	new module / model naming	2020-12-11 10:25:04 +00:00
Patrick von Platen	773b051aa8	correct flax bert model file	2020-12-11 10:11:30 +00:00
Patrick von Platen	26db3c2bdf	save intermediate	2020-12-11 10:10:33 +00:00
Patrick von Platen	4490efef47	save intermediate	2020-12-11 10:10:23 +00:00
Patrick von Platen	70492ddb6f	:wqallkxMerge remote-tracking branch 'main/master' into new_flax_design	2020-12-11 10:01:58 +00:00
Cola	935e346959	🎨 Change nn.dropout to layer.Dropout (#9047 )	2020-12-11 10:40:25 +01:00
Julien Plu	b01ddc9577	Remove value error (#8985 ) * Remove value error * Try a fix for parameter ordering * Restore previous behavior * Add documentation * Review the comment	2020-12-10 17:17:19 -05:00
NatLun137	91ab02af28	Fix typo #9012 (#1 ) (#9038 ) There is a tiny typo in the code "transformers/examples/language-modeling/run_mlm_wwm.py" at line 284. [Details.](https://github.com/huggingface/transformers/issues/9012)	2020-12-10 16:41:00 -05:00
Sylvain Gugger	8d4bb02056	Refactor FLAX tests (#9034 )	2020-12-10 15:57:39 -05:00
Sylvain Gugger	1310e1a758	Enforce all objects in the main init are documented (#9014 )	2020-12-10 11:57:12 -05:00
Sylvain Gugger	51e81e5895	MPNet copyright files (#9015 )	2020-12-10 09:29:38 -05:00
Sylvain Gugger	35bffd70e2	Fix documention of book in LayoutLM (#9017 )	2020-12-10 09:28:49 -05:00
Patrick von Platen	9ad52af16f	save intermediate	2020-12-10 09:11:06 +00:00
Cola	c95de29e31	✏️ Fix typo (#9020 )	2020-12-10 08:22:52 +01:00
Stas Bekman	5e637e6c69	[wip] [ci] doc-job-skip take #4 dry-run (#8980 ) * ci-doc-job-skip-take-4 * wip * wip * wip * wip * skip yaml * wip * wip * wip * wip * wip * wip * wip * wip * wip * wip * wip * wip * ready to test * yet another way * trying with HEAD * trying with head.sha * trying with head.sha fix * trying with head.sha fix wip * undo * try to switch to sha * current branch * current branch * PR number check * joy ride * joy ride * joy ride * joy ride * joy ride * joy ride * joy ride * joy ride * joy ride * joy ride * joy ride * joy ride	2020-12-09 15:36:36 -05:00
Patrick von Platen	06971ac4f9	[Bart] Refactor - fix issues, consistency with the library, naming (#8900 ) * remove make on the fly linear embedding * start refactor * big first refactor * save intermediate * save intermediat * correct mask issue * save tests * refactor padding masks * make all tests pass * further refactor * make pegasus test pass * fix bool if * fix leftover tests * continue * bart renaming * delete torchscript test hack * fix imports in tests * correct shift * fix docs and repo cons * re-add fix for FSTM * typo in test * fix typo * fix another typo * continue * hot fix 2 for tf * small fixes * refactor types linting * continue * finish refactor * fix import in tests * better bart names * further refactor and add test * delete hack * apply sylvains and lysandres commens * small perf improv * further perf improv * improv perf * fix typo * make style * small perf improv	2020-12-09 20:55:24 +01:00
Funtowicz MorganandMarc van Zee	75627148ee	Flax Masked Language Modeling training example (#8728 ) * Remove "Model" suffix from Flax models to look more 🤗 Signed-off-by: Morgan Funtowicz <morgan@huggingface.co> * Initial working (forward + backward) for Flax MLM training example. Signed-off-by: Morgan Funtowicz <morgan@huggingface.co> * Simply code Signed-off-by: Morgan Funtowicz <morgan@huggingface.co> * Addressing comments, using module and moving to LM task. Signed-off-by: Morgan Funtowicz <morgan@huggingface.co> * Restore parameter name "module" wrongly renamed model. Signed-off-by: Morgan Funtowicz <morgan@huggingface.co> * Restore correct output ordering... Signed-off-by: Morgan Funtowicz <morgan@huggingface.co> * Actually commit the example 😅 Signed-off-by: Morgan Funtowicz <morgan@huggingface.co> * Add FlaxBertModelForMaskedLM after rebasing. Signed-off-by: Morgan Funtowicz <funtowiczmo@gmail.com> * Make it possible to initialize the training from scratch Signed-off-by: Morgan Funtowicz <funtowiczmo@gmail.com> * Reuse flax linen example of cross entropy loss Signed-off-by: Morgan Funtowicz <funtowiczmo@gmail.com> * Added specific data collator for flax Signed-off-by: Morgan Funtowicz <funtowiczmo@gmail.com> * Remove todo for data collator Signed-off-by: Morgan Funtowicz <funtowiczmo@gmail.com> * Added evaluation step Signed-off-by: Morgan Funtowicz <funtowiczmo@gmail.com> * Added ability to provide dtype to support bfloat16 on TPU Signed-off-by: Morgan Funtowicz <funtowiczmo@gmail.com> * Enable flax tensorboard output Signed-off-by: Morgan Funtowicz <funtowiczmo@gmail.com> * Enable jax.pmap support. Signed-off-by: Morgan Funtowicz <funtowiczmo@gmail.com> * Ensure batches are correctly sized to be dispatched with jax.pmap Signed-off-by: Morgan Funtowicz <funtowiczmo@gmail.com> * Enable bfloat16 with --fp16 cmdline args Signed-off-by: Morgan Funtowicz <funtowiczmo@gmail.com> * Correctly export metrics to tensorboard Signed-off-by: Morgan Funtowicz <funtowiczmo@gmail.com> * Added dropout and ability to use it. Signed-off-by: Morgan Funtowicz <funtowiczmo@gmail.com> * Effectively enable & disable during training and evaluation steps. Signed-off-by: Morgan Funtowicz <funtowiczmo@gmail.com> * Oops. Signed-off-by: Morgan Funtowicz <funtowiczmo@gmail.com> * Enable specifying kernel initializer scale Signed-off-by: Morgan Funtowicz <funtowiczmo@gmail.com> * Style. Signed-off-by: Morgan Funtowicz <funtowiczmo@gmail.com> * Added warmup step to the learning rate scheduler. Signed-off-by: Morgan Funtowicz <funtowiczmo@gmail.com> * Fix typo. Signed-off-by: Morgan Funtowicz <funtowiczmo@gmail.com> * Print training loss Signed-off-by: Morgan Funtowicz <funtowiczmo@gmail.com> * Make style Signed-off-by: Morgan Funtowicz <funtowiczmo@gmail.com> * fix linter issue (flake8) Signed-off-by: Morgan Funtowicz <funtowiczmo@gmail.com> * Fix model matching Signed-off-by: Morgan Funtowicz <funtowiczmo@gmail.com> * Fix dummies Signed-off-by: Morgan Funtowicz <funtowiczmo@gmail.com> * Fix non default dtype on Flax models Signed-off-by: Morgan Funtowicz <funtowiczmo@gmail.com> * Use the same create_position_ids_from_input_ids for FlaxRoberta Signed-off-by: Morgan Funtowicz <funtowiczmo@gmail.com> * Make Roberta attention as Bert Signed-off-by: Morgan Funtowicz <funtowiczmo@gmail.com> * fix copy Signed-off-by: Morgan Funtowicz <funtowiczmo@gmail.com> * Wording. Co-authored-by: Marc van Zee <marcvanzee@gmail.com> Co-authored-by: Marc van Zee <marcvanzee@gmail.com>	2020-12-09 17:13:56 +01:00
StillKeepTry	df2af6d8b8	Add MP Net 2 (#9004 )	2020-12-09 10:32:43 -05:00
cronoik	8729109855	fixes #8968 (#9009 )	2020-12-09 16:21:41 +01:00
Simon Brandeis	e977ed2142	Add the code_search_net dataset tag to CodeBERTa model cards (#9005 )	2020-12-09 15:43:19 +01:00
Patrick von Platen	da37a21c89	push (#9008 )	2020-12-09 15:14:33 +01:00
Sylvain Gugger	61abd50b98	Remove use of deprected method in Trainer HP search (#8996 )	2020-12-09 09:13:41 -05:00
Sylvain Gugger	7e1d709e2a	Fix link to stable version in the doc navbar (#9007 )	2020-12-09 09:11:39 -05:00
Patrick von Platen Ayush Jain ayushtiku5	02d0e0355c	Diverse beam search 2 (#9006 ) * diverse beam search * bug fixes * bug fixes * bug fix * separate out diverse_beam_search function * separate out diverse_beam_search function * bug fix * improve code quality * bug fix * bug fix * separate out diverse beam search scorer * code format * code format * code format * code format * add test * code format * documentation changes * code quality * add slow integration tests * more general name * refactor into logits processor * add test * avoid too much copy paste * refactor * add to docs * fix-copies * bug fix * Revert "bug fix" This reverts commit c99eb5a8dc57a7b0d33a8ac06d8c6a32a7812ad4. * improve comment * implement sylvains feedback Co-authored-by: Ayush Jain <a.jain@sprinklr.com> Co-authored-by: ayushtiku5 <40797286+ayushtiku5@users.noreply.github.com>	2020-12-09 15:00:37 +01:00