commit 42c9067ffa17a368f07fba3e6ee83ae220d87d05 Author: c-my Date: Mon Jan 6 12:41:33 2020 +0800 initial commit diff --git a/.gitignore b/.gitignore new file mode 100644 index 0000000..9efa981 --- /dev/null +++ b/.gitignore @@ -0,0 +1 @@ +/watch_later \ No newline at end of file diff --git a/input.conf b/input.conf new file mode 100644 index 0000000..1ee5f94 --- /dev/null +++ b/input.conf @@ -0,0 +1,193 @@ +# mpv keybindings +# +# Location of user-defined bindings: ~/.config/mpv/input.conf +# +# Lines starting with # are comments. Use SHARP to assign the # key. +# Copy this file and uncomment and edit the bindings you want to change. +# +# List of commands and further details: DOCS/man/input.rst +# List of special keys: --input-keylist +# Keybindings testing mode: mpv --input-test --force-window --idle +# +# Use 'ignore' to unbind a key fully (e.g. 'ctrl+a ignore'). +# +# Strings need to be quoted and escaped: +# KEY show-text "This is a single backslash: \\ and a quote: \" !" +# +# You can use modifier-key combinations like Shift+Left or Ctrl+Alt+x with +# the modifiers Shift, Ctrl, Alt and Meta (may not work on the terminal). +# +# The default keybindings are hardcoded into the mpv binary. +# You can disable them completely with: --no-input-default-bindings + +# Developer note: +# On compilation, this file is baked into the mpv binary, and all lines are +# uncommented (unless '#' is followed by a space) - thus this file defines the +# default key bindings. + +# If this is enabled, treat all the following bindings as default. +#default-bindings start + +#MBTN_LEFT ignore # don't do anything +#MBTN_LEFT_DBL cycle fullscreen # toggle fullscreen on/off +#MBTN_RIGHT cycle pause # toggle pause on/off +#MBTN_BACK playlist-prev +#MBTN_FORWARD playlist-next +MBTN_MID cycle fullscreen + +# Mouse wheels, touchpad or other input devices that have axes +# if the input devices supports precise scrolling it will also scale the +# numeric value accordingly +WHEEL_UP add volume 2 +WHEEL_DOWN add volume -2 +WHEEL_LEFT seek -10 exact +WHEEL_RIGHT seek 10 exact + +## Seek units are in seconds, but note that these are limited by keyframes +RIGHT seek 5 exact +LEFT seek -5 exact +UP add volume 2 +DOWN add volume -2 +# Do smaller, always exact (non-keyframe-limited), seeks with shift. +# Don't show them on the OSD (no-osd). +#Shift+RIGHT no-osd seek 1 exact +#Shift+LEFT no-osd seek -1 exact +#Shift+UP no-osd seek 5 exact +#Shift+DOWN no-osd seek -5 exact +Shift+RIGHT seek 30 exact +Shift+LEFT seek -30 exact +Shift+UP no-osd seek 5 exact +Shift+DOWN no-osd seek -5 exact + +# Skip to previous/next subtitle (subject to some restrictions; see manpage) +#Ctrl+LEFT no-osd sub-seek -1 +#Ctrl+RIGHT no-osd sub-seek 1 +# Adjust timing to previous/next subtitle +#Ctrl+Shift+LEFT sub-step -1 +#Ctrl+Shift+RIGHT sub-step 1 +# Move video rectangle +#Alt+left add video-pan-x 0.1 +#Alt+right add video-pan-x -0.1 +#Alt+up add video-pan-y 0.1 +#Alt+down add video-pan-y -0.1 +# Zoom/unzoom video +#Alt++ add video-zoom 0.1 +#Alt+- add video-zoom -0.1 +# Reset video zoom/pan settings +#Alt+BS set video-zoom 0 ; set video-pan-x 0 ; set video-pan-y 0 +#PGUP add chapter 1 # skip to next chapter +#PGDWN add chapter -1 # skip to previous chapter +#Shift+PGUP seek 600 +#Shift+PGDWN seek -600 +[ add speed -0.1 # scale playback speed +] add speed 0.1 +{ multiply speed 0.9 +} multiply speed 1.1/1 +#BS set speed 1.0 # reset speed to normal +#Shift+BS revert-seek # undo previous (or marked) seek +#Shift+Ctrl+BS revert-seek mark # mark position for revert-seek +#q quit +#Q quit-watch-later +#q {encode} quit 4 +#ESC set fullscreen no +#ESC {encode} quit 4 +#p cycle pause # toggle pause/playback mode +#. frame-step # advance one frame and pause +#, frame-back-step # go back by one frame and pause +# SPACE cycle pause +#> playlist-next # skip to next file +ENTER cycle fullscreen +#< playlist-prev # skip to previous file +#O no-osd cycle-values osd-level 3 1 # cycle through OSD mode +#o show-progress +#P show-progress +#i script-binding stats/display-stats +#I script-binding stats/display-stats-toggle +#` script-binding console/enable +#z add sub-delay -0.1 # subtract 100 ms delay from subs +#Z add sub-delay +0.1 # add +#x add sub-delay +0.1 # same as previous binding (discouraged) +#ctrl++ add audio-delay 0.100 # this changes audio/video sync +#ctrl+- add audio-delay -0.100 +#9 add volume -2 +#/ add volume -2 +#0 add volume 2 +#* add volume 2 +#m cycle mute +#1 add contrast -1 +#2 add contrast 1 +#3 add brightness -1 +#4 add brightness 1 +#5 add gamma -1 +#6 add gamma 1 +#7 add saturation -1 +#8 add saturation 1 +#Alt+0 set window-scale 0.5 +#Alt+1 set window-scale 1.0 +#Alt+2 set window-scale 2.0 +# toggle deinterlacer (automatically inserts or removes required filter) +#d cycle deinterlace +#r add sub-pos -1 # move subtitles up +#R add sub-pos +1 # down +#t add sub-pos +1 # same as previous binding (discouraged) +#v cycle sub-visibility +# stretch SSA/ASS subtitles with anamorphic videos to match historical +#V cycle sub-ass-vsfilter-aspect-compat +# switch between applying no style overrides to SSA/ASS subtitles, and +# overriding them almost completely with the normal subtitle style +#u cycle-values sub-ass-override "force" "no" +#j cycle sub # cycle through subtitles +#J cycle sub down # ...backwards +#SHARP cycle audio # switch audio streams +#_ cycle video +#T cycle ontop # toggle video window ontop of other windows +# f cycle fullscreen # toggle fullscreen +#s screenshot # take a screenshot +#S screenshot video # ...without subtitles +#Ctrl+s screenshot window # ...with subtitles and OSD, and scaled +#Alt+s screenshot each-frame # automatically screenshot every frame +#w add panscan -0.1 # zoom out with -panscan 0 -fs +#W add panscan +0.1 # in +#e add panscan +0.1 # same as previous binding (discouraged) +# cycle video aspect ratios; "-1" is the container aspect +#A cycle-values video-aspect-override "16:9" "4:3" "2.35:1" "-1" +#POWER quit +#PLAY cycle pause +#PAUSE cycle pause +#PLAYPAUSE cycle pause +#STOP quit +#FORWARD seek 60 +#REWIND seek -60 +#NEXT playlist-next +#PREV playlist-prev +#VOLUME_UP add volume 2 +#VOLUME_DOWN add volume -2 +#MUTE cycle mute +#CLOSE_WIN quit +#CLOSE_WIN {encode} quit 4 +#E cycle edition # next edition +#l ab-loop # Set/clear A-B loop points +#L cycle-values loop-file "inf" "no" # toggle infinite looping +#ctrl+c quit 4 +#DEL script-binding osc/visibility # cycle OSC display +#ctrl+h cycle-values hwdec "auto" "no" # cycle hardware decoding +#F8 show_text ${playlist} # show playlist +#F9 show_text ${track-list} # show list of audio/sub streams + +# +# Legacy bindings (may or may not be removed in the future) +# +#! add chapter -1 # skip to previous chapter +#@ add chapter 1 # next + +# +# Not assigned by default +# (not an exhaustive list of unbound commands) +# + +# ? add sub-scale +0.1 # increase subtitle font size +# ? add sub-scale -0.1 # decrease subtitle font size +# ? cycle angle # switch DVD/Bluray angle +# ? cycle sub-forced-only # toggle DVD forced subs +# ? cycle program # cycle transport stream programs +# ? stop # stop playback (quit or enter idle mode) \ No newline at end of file diff --git a/mpv.conf b/mpv.conf new file mode 100644 index 0000000..68e5e4e --- /dev/null +++ b/mpv.conf @@ -0,0 +1,143 @@ +# +# Example mpv configuration file +# +# Warning: +# +# The commented example options usually do _not_ set the default values. Call +# mpv with --list-options to see the default values for most options. There is +# no builtin or example mpv.conf with all the defaults. +# +# +# Configuration files are read system-wide from /usr/local/etc/mpv.conf +# and per-user from ~/.config/mpv/mpv.conf, where per-user settings override +# system-wide settings, all of which are overridden by the command line. +# +# Configuration file settings and the command line options use the same +# underlying mechanisms. Most options can be put into the configuration file +# by dropping the preceding '--'. See the man page for a complete list of +# options. +# +# Lines starting with '#' are comments and are ignored. +# +# See the CONFIGURATION FILES section in the man page +# for a detailed description of the syntax. +# +# Profiles should be placed at the bottom of the configuration file to ensure +# that settings wanted as defaults are not restricted to specific profiles. + +save-position-on-quit=yes + +screenshot-template="%F-%wH:%wM:%wS.%wT" +screenshot-directory=~/Pictures/mpv-shot + +################## +# video settings # +################## + +# Start in fullscreen mode by default. +#fs=yes + +# force starting with centered window +#geometry=50%:50% + +# don't allow a new window to have a size larger than 90% of the screen size +#autofit-larger=90%x90% + +# Do not close the window on exit. +keep-open=yes + +# Do not wait with showing the video window until it has loaded. (This will +# resize the window once video is loaded. Also always shows a window with +# audio.) +#force-window=immediate + +# Disable the On Screen Controller (OSC). +#osc=no + +# Keep the player window on top of all other windows. +#ontop=yes + +# Specify high quality video rendering preset (for --vo=gpu only) +# Can cause performance problems with some drivers and GPUs. +#profile=gpu-hq + +# Force video to lock on the display's refresh rate, and change video and audio +# speed to some degree to ensure synchronous playback - can cause problems +# with some drivers and desktop environments. +#video-sync=display-resample + +# Enable hardware decoding if available. Often, this does not work with all +# video outputs, but should work well with default settings on most systems. +# If performance or energy usage is an issue, forcing the vdpau or vaapi VOs +# may or may not help. +#hwdec=auto + +################## +# audio settings # +################## + +# Specify default audio device. You can list devices with: --audio-device=help +# The option takes the device string (the stuff between the '...'). +#audio-device=alsa/default + +# Do not filter audio to keep pitch when changing playback speed. +#audio-pitch-correction=no + +# Output 5.1 audio natively, and upmix/downmix audio with a different format. +#audio-channels=5.1 +# Disable any automatic remix, _if_ the audio output accepts the audio format. +# of the currently played file. See caveats mentioned in the manpage. +# (The default is "auto-safe", see manpage.) +#audio-channels=auto + +################## +# other settings # +################## + +# Pretend to be a web browser. Might fix playback with some streaming sites, +# but also will break with shoutcast streams. +#user-agent="Mozilla/5.0" + +# cache settings +# +# Use a large seekable RAM cache even for local input. +#cache=yes +# +# Use extra large RAM cache (needs cache=yes to make it useful). +#demuxer-max-bytes=500M +#demuxer-max-back-bytes=100M +# +# Disable the behavior that the player will pause if the cache goes below a +# certain fill size. +#cache-pause=no +# +# Store cache payload on the hard disk instead of in RAM. (This may negatively +# impact performance unless used for slow input such as network.) +#cache-dir=~/.cache/ +#cache-on-disk=yes + +# Display English subtitles if available. +#slang=en + +# Play Finnish audio if available, fall back to English otherwise. +#alang=fi,en + +# Change subtitle encoding. For Arabic subtitles use 'cp1256'. +# If the file seems to be valid UTF-8, prefer UTF-8. +# (You can add '+' in front of the codepage to force it.) +#sub-codepage=cp1256 + +# You can also include other configuration files. +#include=/path/to/the/file/you/want/to/include + +############ +# Profiles # +############ + +# The options declared as part of profiles override global default settings, +# but only take effect when the profile is active. + +# The following profile can be enabled on the command line with: --profile=eye-cancer + +#[eye-cancer] +#sharpen=5 \ No newline at end of file diff --git a/script-opts/osc.conf b/script-opts/osc.conf new file mode 100644 index 0000000..5447508 --- /dev/null +++ b/script-opts/osc.conf @@ -0,0 +1,2 @@ +# script-opts/osc.conf +deadzonesize=1 \ No newline at end of file diff --git a/scripts/autoload.lua b/scripts/autoload.lua new file mode 100644 index 0000000..618dbed --- /dev/null +++ b/scripts/autoload.lua @@ -0,0 +1,217 @@ +-- This script automatically loads playlist entries before and after the +-- the currently played file. It does so by scanning the directory a file is +-- located in when starting playback. It sorts the directory entries +-- alphabetically, and adds entries before and after the current file to +-- the internal playlist. (It stops if the it would add an already existing +-- playlist entry at the same position - this makes it "stable".) +-- Add at most 5000 * 2 files when starting a file (before + after). + +--[[ +To configure this script use file autoload.conf in director script-opts (the "script-opts" +directory must be in the mpv configuration directory, typically ~/.config/mpv/). +Example configuration would be: +disabled=false +images=false +videos=true +audio=true +--]] + +MAXENTRIES = 5000 + +local msg = require 'mp.msg' +local options = require 'mp.options' +local utils = require 'mp.utils' + +o = { + disabled = false, + images = true, + videos = true, + audio = true +} +options.read_options(o) + +function Set (t) + local set = {} + for _, v in pairs(t) do set[v] = true end + return set +end + +function SetUnion (a,b) + local res = {} + for k in pairs(a) do res[k] = true end + for k in pairs(b) do res[k] = true end + return res +end + +EXTENSIONS_VIDEO = Set { + 'mkv', 'avi', 'mp4', 'ogv', 'webm', 'rmvb', 'flv', 'wmv', 'mpeg', 'mpg', 'm4v', '3gp' +} + +EXTENSIONS_AUDIO = Set { + 'mp3', 'wav', 'ogm', 'flac', 'm4a', 'wma', 'ogg', 'opus' +} + +EXTENSIONS_IMAGES = Set { + 'jpg', 'jpeg', 'png', 'tif', 'tiff', 'gif', 'webp', 'svg', 'bmp' +} + +EXTENSIONS = Set {} +if o.videos then EXTENSIONS = SetUnion(EXTENSIONS, EXTENSIONS_VIDEO) end +if o.audio then EXTENSIONS = SetUnion(EXTENSIONS, EXTENSIONS_AUDIO) end +if o.images then EXTENSIONS = SetUnion(EXTENSIONS, EXTENSIONS_IMAGES) end + +function add_files_at(index, files) + index = index - 1 + local oldcount = mp.get_property_number("playlist-count", 1) + for i = 1, #files do + mp.commandv("loadfile", files[i], "append") + mp.commandv("playlist-move", oldcount + i - 1, index + i - 1) + end +end + +function get_extension(path) + match = string.match(path, "%.([^%.]+)$" ) + if match == nil then + return "nomatch" + else + return match + end +end + +table.filter = function(t, iter) + for i = #t, 1, -1 do + if not iter(t[i]) then + table.remove(t, i) + end + end +end + +-- splitbynum and alnumcomp from alphanum.lua (C) Andre Bogus +-- Released under the MIT License +-- http://www.davekoelle.com/files/alphanum.lua + +-- split a string into a table of number and string values +function splitbynum(s) + local result = {} + for x, y in (s or ""):gmatch("(%d*)(%D*)") do + if x ~= "" then table.insert(result, tonumber(x)) end + if y ~= "" then table.insert(result, y) end + end + return result +end + +function clean_key(k) + k = (' '..k..' '):gsub("%s+", " "):sub(2, -2):lower() + return splitbynum(k) +end + +-- compare two strings +function alnumcomp(x, y) + local xt, yt = clean_key(x), clean_key(y) + for i = 1, math.min(#xt, #yt) do + local xe, ye = xt[i], yt[i] + if type(xe) == "string" then ye = tostring(ye) + elseif type(ye) == "string" then xe = tostring(xe) end + if xe ~= ye then return xe < ye end + end + return #xt < #yt +end + +local autoloaded = nil + +function find_and_add_entries() + local path = mp.get_property("path", "") + local dir, filename = utils.split_path(path) + msg.trace(("dir: %s, filename: %s"):format(dir, filename)) + if o.disabled then + msg.verbose("stopping: autoload disabled") + return + elseif #dir == 0 then + msg.verbose("stopping: not a local path") + return + end + + local pl_count = mp.get_property_number("playlist-count", 1) + -- check if this is a manually made playlist + if (pl_count > 1 and autoloaded == nil) or + (pl_count == 1 and EXTENSIONS[string.lower(get_extension(filename))] == nil) then + msg.verbose("stopping: manually made playlist") + return + else + autoloaded = true + end + + local pl = mp.get_property_native("playlist", {}) + local pl_current = mp.get_property_number("playlist-pos-1", 1) + msg.trace(("playlist-pos-1: %s, playlist: %s"):format(pl_current, + utils.to_string(pl))) + + local files = utils.readdir(dir, "files") + if files == nil then + msg.verbose("no other files in directory") + return + end + table.filter(files, function (v, k) + if string.match(v, "^%.") then + return false + end + local ext = get_extension(v) + if ext == nil then + return false + end + return EXTENSIONS[string.lower(ext)] + end) + table.sort(files, alnumcomp) + + if dir == "." then + dir = "" + end + + -- Find the current pl entry (dir+"/"+filename) in the sorted dir list + local current + for i = 1, #files do + if files[i] == filename then + current = i + break + end + end + if current == nil then + return + end + msg.trace("current file position in files: "..current) + + local append = {[-1] = {}, [1] = {}} + for direction = -1, 1, 2 do -- 2 iterations, with direction = -1 and +1 + for i = 1, MAXENTRIES do + local file = files[current + i * direction] + local pl_e = pl[pl_current + i * direction] + if file == nil or file[1] == "." then + break + end + + local filepath = dir .. file + if pl_e then + -- If there's a playlist entry, and it's the same file, stop. + msg.trace(pl_e.filename.." == "..filepath.." ?") + if pl_e.filename == filepath then + break + end + end + + if direction == -1 then + if pl_current == 1 then -- never add additional entries in the middle + msg.info("Prepending " .. file) + table.insert(append[-1], 1, filepath) + end + else + msg.info("Adding " .. file) + table.insert(append[1], filepath) + end + end + end + + add_files_at(pl_current + 1, append[1]) + add_files_at(pl_current, append[-1]) +end + +mp.register_event("start-file", find_and_add_entries) \ No newline at end of file diff --git a/scripts/ontop-playback.lua b/scripts/ontop-playback.lua new file mode 100644 index 0000000..234d869 --- /dev/null +++ b/scripts/ontop-playback.lua @@ -0,0 +1,19 @@ +--makes mpv disable ontop when pausing and re-enable it again when resuming playback +--please note that this won't do anything if ontop was not enabled before pausing + +local was_ontop = false + +mp.observe_property("pause", "bool", function(name, value) + local ontop = mp.get_property_native("ontop") + if value then + if ontop then + mp.set_property_native("ontop", false) + was_ontop = true + end + else + if was_ontop and not ontop then + mp.set_property_native("ontop", true) + end + was_ontop = false + end +end) \ No newline at end of file diff --git a/scripts/osc-windowed.lua b/scripts/osc-windowed.lua new file mode 100644 index 0000000..5006926 --- /dev/null +++ b/scripts/osc-windowed.lua @@ -0,0 +1,8 @@ + +-- mp.observe_property("fullscreen", "bool", function(name, value) +-- if value then +-- mp.commandv("script-message", "osc-visibility", "auto", "no-osd") +-- else +-- mp.commandv("script-message", "osc-visibility", "always", "no-osd") +-- end +-- end) \ No newline at end of file